On this page
- Use twist bits for metal, masonry bits for brick and concrete, wood bits for timber.
- Plain HSS drills mild steel; stainless steel needs HSS-Co (cobalt) bits.
- Porcelain tile needs a diamond bit with hammer mode off.
- For wall plugs and anchors, drill the same diameter as the plug or anchor.
A drill bit set is a case of cutting bits in graded diameters, made for one material or several. Pick one by what you drill most: walls, steel, timber or tile.
What Bits Come in a Drill Bit Set?
A drill bit set holds one of three bit families, or a mix in a combination set.
- Twist bits: spiral flutes; drill metal, wood and plastic.
- Masonry bits: tungsten carbide tip; drill brick, block, concrete and stone.
- Wood bits: brad point for clean holes, spade for wide holes, auger for deep holes.
Which Drill Bit Material Suits Which Surface?
Bit material decides what a drill bit set can cut.

Bit material vs surface
Pick the row for what you drill most| Bit material | Best surface | Avoid on |
|---|---|---|
| HSS (high-speed steel) Default pick | Mild steel, aluminium, copper, wood, plastic | Stainless steel, masonry |
| HSS-TiN (titanium nitride coated) | Steel, non-ferrous metals | Masonry |
| HSS-Co 5% (cobalt) | Stainless steel, steels up to 1,100 N/mm² | Masonry |
| HSS-Co 8% (cobalt) | High-alloy steels, titanium | Side loads; more brittle |
| Carbide-tipped masonry | Brick, block, concrete, stone | Metal, porcelain tile |
| Diamond-tipped | Porcelain and vitrified tile, glass | Hammer mode |
Not sure if a tile is ceramic or porcelain? See our guide to types of tiles.
Which Drill Bit Sizes Do You Need?
A standard metal drill bit set runs from 1 mm to 13 mm in 0.5 mm steps, which gives 25 bits.
- Indian standard: IS 5101:1991, the BIS specification for parallel shank jobber twist drills, lists sizes up to 20 mm.
- Wall plugs: drill the same diameter as the plug; oversize holes weaken the hold.
How Do You Choose the Right Drill Bit Set?
Choose a drill bit set by the surface you drill most.
- For fixing shelves and fittings to brick, block or concrete walls, start with a masonry set.
- Add an HSS or cobalt set for grills and gates.
- Check the shank: SDS-plus bits fit only rotary hammers, not a normal chuck.
- Compare piece count and size range across brands such as Bosch, Taparia and JK.
Drilling this week?
Delivered across Bengaluru.
How Do You Care for Drill Bits and Use Them Safely?
Drill bits last longer when kept cool, clean and cased.
Run larger bits slower and ease off the pressure. Wipe bits dry and store them in the case.
Wear goggles, clamp small workpieces and check walls for hidden wiring and pipes. Keep hammer mode off on tile and cool the bit with water.
Breaking concrete? See our jackhammer guide.


