0 items
Rs. 0.00
Tenax Polyester Marble Glue Mastic, 1.35kg
Tenax Polyester Marble Glue Mastic, 1.35kgಉಪಲಬ್ದವಿದೆ
ನಿಯಮಿತ ಬೆಲೆ
Rs. 650.00
ನಿಯಮಿತ ಬೆಲೆ
ಮಾರಾಟ ಬೆಲೆ
Rs. 650.00
ಘಟಕ ಬೆಲೆ
₹0.0/
Incl GST
ಚೆಕ್ಔಟ್ನಲ್ಲಿ ಶಿಪ್ಪಿಂಗ್ ಅನ್ನು ಲೆಕ್ಕಹಾಕಲಾಗುತ್ತದೆ.
ಪಿಕಪ್ ಲಭ್ಯತೆಯನ್ನು ಲೋಡ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಲಿಲ್ಲ
Product Highlights
- Brand: Tenax
- Product: Polyester Marble Glue Mastic
- Type: Solido (paste) or Liquido (liquid)
- Colour: Paglierino (Ivory) or Bianco 2 (Ultra White)
- Pack Weight: 1.35 kg per kit
- Application: Bonding, chip repair, and crack filling on marble, granite, quartz, and agglomerate stone
Product Description
Tenax Polyester Marble Glue Mastic is a professional two-component polyester resin kit for high-strength bonding, filling, and restoration of marble, granite, and engineered stone surfaces. Available in two viscosity types - Solido (thixotropic paste for vertical joints, edge laminations, and chip repairs) and Liquido (self-leveling liquid for horizontal cracks, hairline fractures, and capillary penetration) - and two colours - Paglierino (Ivory) for warm-toned stones and Bianco 2 (Ultra White) for white marble and engineered quartz. Gels in 3-7 minutes and accepts grinding, sanding, and polishing within 1.5 to 2 hours - up to 10x faster than traditional epoxies. Mix at exactly 100:2 to 100:3 by weight - incorrect ratios cause brittle bonds, permanent tackiness, or colour discolouration.
Key Features
- Two viscosity options: Solido paste for non-sag vertical applications, Liquido liquid for self-leveling horizontal crack fills
- Ultra-fast cure: Gels in 3-7 minutes, sandable and polishable within 1.5 to 2 hours
- Accurate colour matching: Paglierino for beige and cream stones, Bianco 2 for white marble and quartz - accepts universal tinting pastes
- Low shrinkage: Permanent, highly sandable bond with minimal volume loss during cure
- Precise catalyst system: 50g hardener calculated for the full 1.3kg base - use a digital scale for accurate mixing
Variant Comparison - Solido vs Liquido
| Specification | Solido | Liquido |
|---|---|---|
| Consistency | Thixotropic paste - knife-grade, non-sag | Low-viscosity self-leveling liquid |
| Best For | Vertical joints, edge laminations, chip repairs, overhanging countertops | Horizontal cracks, hairline fractures, floor tile joints, capillary penetration |
| Colours Available | Paglierino (Ivory) / Bianco 2 (Ultra White) | Paglierino (Ivory) / Bianco 2 (Ultra White) |
| Kit Pack Weight | 1.35 kg (1.3 kg base + 50g hardener) | 1.35 kg (1.3 kg base + 50g hardener) |
| Catalyst Ratio | 100 parts base : 2-3 parts hardener | 100 parts base : 2-3 parts hardener |
| Gel Time (25°C) | 3 to 7 minutes | 3 to 7 minutes |
| Sandable / Polishable | Within 1.5 to 2 hours | Within 1.5 to 2 hours |
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Brand | Tenax |
| Product Type | Two-Component Polyester Resin Mastic System |
| Type Variants | Solido (thixotropic paste) and Liquido (self-leveling liquid) |
| Colour Variants | Paglierino (Ivory) and Bianco 2 (Ultra White) |
| Pack Weight | 1.35 kg total (1.3 kg base + 50g hardener paste) |
| Mixing Ratio | 100 parts base : 2-3 parts hardener by weight (approx. 3.8% catalyst) |
| Gel Time | 3 to 7 minutes at 25°C |
| Sandable / Polishable | Within 1.5 to 2 hours |
| Solido - Primary Use | Vertical surfaces, edge laminations, chip repairs, overhanging countertops |
| Liquido - Primary Use | Horizontal cracks, hairline fractures, floor joints, capillary penetration |
| Paglierino - Best For | Beige marble, travertine, cream granite, buff-toned natural stone |
| Bianco 2 - Best For | White marble (Carrara, Makrana), white engineered quartz |
| Tinting | Accepts universal pigment pastes for custom colour matching |
| Compatible Substrates | Marble, granite, quartz, agglomerate stone |
Critical - Mixing Ratio and Working Time
Read Before Mixing
- Use a digital scale: Mix exactly 100 parts base to 2-3 parts hardener by weight. The included 50g hardener is calculated for the full 1.3kg base if mixed at once
- Too much hardener: Accelerates gelling, creates a brittle bond, and causes yellowing or dark discolouration - ruins colour match
- Too little hardener: Breaks chemical cross-linking - mastic stays permanently tacky and gums up sanding pads
- Short working window: Gel time is 3-7 minutes - prepare surfaces before mixing and work in small batches, not large amounts at once
Application Guidelines
Step-by-Step Application
- Surface preparation: Scrape, clean, and vacuum the repair area. Stone must be bone dry and free from old adhesives, wax, and sealants
- Measure and tint: Weigh out the working amount on a digital scale. Add universal pigments to the base now if colour customisation is needed, before introducing hardener
- Mix: Add 2-3% hardener paste by weight and stir rapidly until fully homogeneous with no colour streaks
- Apply: Solido - press firmly into joints or voids with a putty knife. Liquido - pour into the crack channel and overfill slightly to compensate for volume shrinkage during cure
- Cure: Leave undisturbed through the hot exothermic gel phase. Do not shift bonded pieces while setting
- Finish: After 1.5-2 hours, verify cure with a fingernail press test. Grind flush with coarse pads, then step up progressively to matching diamond polishing grits
Why Buy from HomeRun?
- Authentic Tenax Product: Verified genuine professional-grade stone adhesive
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for stone fabrication and on-site repair projects
- Project-Friendly Availability: Order the type and colour variant your project needs - no forced bulk minimum
FAQs
1) How do I choose between Solido and Liquido?
Choose Solido for vertical surfaces, edge laminations, chip repairs, and overhanging countertop joints where the adhesive must not sag or slump. Choose Liquido for horizontal hairline cracks, floor tile joints, and any application where the adhesive needs to self-level and penetrate deep into a narrow gap.
2) How do I choose between Paglierino and Bianco 2?
Paglierino (Ivory) matches warm-toned stones - beige marble, travertine, cream granite, and buff-coloured natural stone. Bianco 2 (Ultra White) is formulated with low-yellowing stabilizers for pure white marble (Carrara, Makrana) and white engineered quartz. Both colours accept universal tinting pastes for further customisation.
3) What happens if I add too much or too little hardener?
Too much hardener accelerates gelling, creates a brittle bond, and causes permanent yellowing or dark streaks that ruin the colour match. Too little hardener means the mastic will never fully cure - it stays tacky and gums up polishing pads. Always use a digital scale and mix at exactly 100:2 to 100:3 by weight.
4) How long do I have to work after mixing?
The gel time is 3 to 7 minutes at 25°C. Prepare all surfaces before mixing and work in small batches. Higher ambient temperatures shorten the working window further - in hot weather, work in smaller portions than usual.
5) When can I grind and polish the repaired surface?
The mastic is ready for grinding, sanding, and polishing within 1.5 to 2 hours. Verify cure by pressing a fingernail into the surface - if no imprint is left, proceed with coarse grinding pads and step up progressively to diamond polishing grits to match the surrounding stone finish.
Returns & Exchange Policy
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once opened or used
- Refer to Refund Policy for complete details
- ಪೂರ್ಣ ಪುಟ ರಿಫ್ರೆಶ್ನಲ್ಲಿ ಆಯ್ಕೆಯ ಫಲಿತಾಂಶಗಳನ್ನು ಆರಿಸುವುದು.
- ಹೊಸ ವಿಂಡೋದಲ್ಲಿ ತೆರೆಯುತ್ತದೆ.
