0 items
Rs. 0.00
Free Delivery
above ₹1000
Pay on Delivery
Taparia Pipe Wrench, 12 inch
Taparia Pipe Wrench, 12 inchಉಪಲಬ್ದವಿದೆ
ನಿಯಮಿತ ಬೆಲೆ
Rs. 459.00
ನಿಯಮಿತ ಬೆಲೆ
Rs. 527.85
ಮಾರಾಟ ಬೆಲೆ
Rs. 459.00
ಘಟಕ ಬೆಲೆ
₹0.0/
Incl GST
ಚೆಕ್ಔಟ್ನಲ್ಲಿ ಶಿಪ್ಪಿಂಗ್ ಅನ್ನು ಲೆಕ್ಕಹಾಕಲಾಗುತ್ತದೆ.
ಪಿಕಪ್ ಲಭ್ಯತೆಯನ್ನು ಲೋಡ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಲಿಲ್ಲ
Product Highlights
- Manufacturer: Taparia Tools Ltd.
- Model: 1273
- Type: Stillson-type single-sided pipe wrench
- Length: 300mm (12 inch)
- Jaw material: Drop-forged Chrome Molybdenum steel
- Handle material: Ductile cast iron
- Suitable pipe range: 20mm to 70mm
Product Description
Taparia Pipe Wrench, 12 inch is a Stillson-type pipe wrench built for gripping round pipe and fittings where a standard spanner can't get a bite. Its 300mm length gives you the leverage professional plumbers and maintenance crews need for larger-diameter pipework, while still being manageable in moderately tight spaces.
The jaws are drop-forged from chrome molybdenum steel with precisely machined teeth cut at an angle that bites into round surfaces without slipping. Differential hardening — 50 to 60 HRC on the jaw teeth and 35 to 45 HRC through the jaw shank — gives you a jaw face hard enough to resist wear and a body tough enough to absorb shock. The handle is ductile cast iron, built for the higher torque this class of wrench is expected to handle.
Key Features
- Chrome molybdenum jaws: Drop-forged for strength under high torque
- Precision-machined teeth: Angled for positive grip on round pipe without biting into it excessively
- Differential hardening: 50–60 HRC on jaw teeth, 35–45 HRC on the jaw shank for wear resistance plus toughness
- Ductile cast iron handle: Rated for the higher torque loads pipe work demands
- Phosphate-coated jaws, painted body: Rust protection for job-site conditions
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Length | 300 mm (12 inch) |
| Suitable pipe range | 20 mm to 70 mm |
| Jaw hardness | 50 to 60 HRC |
| Jaw shank hardness | 35 to 45 HRC |
| Material & Finish | Chrome Molybdenum steel jaws (phosphate), ductile cast iron handle (painted) |
| Standard | Federal Spec. GGG-651 Type II Class A / IS 4003 Part II-1986 |
Recommended Applications
Where this product fits best
- Pipeline installation: Larger-diameter pipe sections needing solid grip and leverage
- Plumbing repairs: Tightening or loosening threaded pipe joints and fittings
- Maintenance work: Routine servicing on round metal components where a spanner won't hold
- Fabrication & fitting: Holding pipe steady while another tool works the opposite end
FAQs
1) What size pipes can this wrench grip?
It's rated for pipe diameters from 20mm to 70mm, covering most common residential and light commercial plumbing pipe sizes.
2) Can I use this wrench on hex nuts and bolts instead of pipe?
No — the jaw teeth are designed to bite into round pipe surfaces. Using it on hardened hex nuts or bolts can damage the teeth and reduce grip over time. Use an adjustable spanner for hex fasteners.
3) How do I maintain the wrench for long-term use?
Wipe the jaws clean after each use to remove grease and metal shavings, and periodically lubricate the adjusting nut and sliding jaw with light machine oil so it adjusts smoothly. Store it dry to avoid corrosion.
4) How does this compare to a smaller 10-inch pipe wrench?
The 12-inch model grips a wider pipe range and delivers more leverage than a 10-inch wrench, at the cost of a bit more length and weight to maneuver. Choose the 10-inch if you mostly work in tighter spaces on smaller pipe.
Returns & Exchange Policy
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
- ಪೂರ್ಣ ಪುಟ ರಿಫ್ರೆಶ್ನಲ್ಲಿ ಆಯ್ಕೆಯ ಫಲಿತಾಂಶಗಳನ್ನು ಆರಿಸುವುದು.
- ಹೊಸ ವಿಂಡೋದಲ್ಲಿ ತೆರೆಯುತ್ತದೆ.
