Popup Image
  • Jaquar Ornamix Prime Bath Tub Spout with Wall Flange I Homerun, Bangalore
1 1

Jaquar Ornamix Prime Bath Tub Spout with Wall Flange

Jaquar Ornamix Prime Bath Tub Spout with Wall Flange

ಸ್ಟಾಕ್ ಮುಗಿದಿದೆ

Rs. 1,707.00
Rs. 2,075.00 Rs. 1,707.00
ಮಾರಾಟ ಮಾರಾಟವಾಗಿದೆ
Incl GST ಚೆಕ್ಔಟ್ನಲ್ಲಿ ಶಿಪ್ಪಿಂಗ್ ಅನ್ನು ಲೆಕ್ಕಹಾಕಲಾಗುತ್ತದೆ.

Product Highlights

  • Manufacturer: Jaquar India
  • Range: Ornamix Prime
  • Product Code: SPJ-CHR-10429PM
  • Type: Wall Mounted Bathtub Spout with Wall Flange - Plain (No Diverter)
  • Material: Solid Brass (Ingots, Rods, and Sheets)
  • Finish: Polished Chrome - Nickel 10.0µm, Chrome 0.3µm electroplated
  • Wall Flange: 52 x 52 mm
  • Water Tightness: 16 Bar (Pass) / Structural: 25 Bar (Pass)
  • Warranty: 10-Year Manufacturer Warranty
  • Application: Wall-mounted bathtub filling in luxury residential and commercial bathrooms

Important - Plain Spout, No Diverter

This is a plain bathtub fill spout with no built-in diverter. Water flows straight into the bathtub only. Switching between the spout and a shower head must be done via a separate concealed diverter mixer valve, purchased separately. If a hand shower connection is required, model SPJ-CHR-10463PM should be specified instead.

Product Description

Jaquar Ornamix Prime Bathtub Spout (SPJ-CHR-10429PM) is a wall-mounted plain bathtub fill spout with matching decorative wall flange, machined from solid brass ingots, rods, and sheets. It mounts flush against finished bathroom tiles via a 1/2" BSP thread connection, with the 52 x 52mm slide-on wall flange covering the raw pipe outlet for a clean, seamless finish. The certified M 24x1 Neoperl aerator (WRAS and ACS approved) mixes air into the stream for a splash-free fill at 18.57 LPM at 3 Bar.

The chrome finish is electroplated to 10.0µm Nickel and 0.3µm Chrome, validated to 500+ hours salt spray resistance. Backed by a 10-year manufacturer warranty. Suitable for pairing with concealed bath-shower diverter mixer valves from the Jaquar Alive, Vignette, or Ornamix body mixer series. The in-wall mixer valve is sold separately.

Key Features

  • Integrated wall flange: 52 x 52mm slide-on chrome flange masks the raw wall pipe outlet for a gap-free finish against tiles
  • WRAS and ACS certified Neoperl aerator: M 24x1 aerator produces a splash-free stream at 18.57 LPM
  • 500+ hour salt spray validated chrome: 10.0µm Nickel and 0.3µm Chrome electroplating resists tarnishing and corrosion
  • Solid brass construction: Machined from brass ingots, rods, and sheets for long-term pressure resistance
  • 10-year manufacturer warranty: Backed by Jaquar's long-term warranty against casting defects and finish issues

Technical Specifications

Technical Specifications (Quick Reference)

Specification Details
Brand Jaquar India
Range Ornamix Prime
Product Code SPJ-CHR-10429PM
Flow Rate 18.57 LPM at 3 Bar
Operating Pressure 0.5 Bar (Min) to 5.0 Bar (Max)
Inlet Connection 1/2" BSP thread
Projection Length 180 mm
Wall Flange Size 52 x 52 mm
Aerator M 24x1 (WRAS and ACS certified)
Chrome Plating Nickel 10.0µm + Chrome 0.3µm
Salt Spray Rating 500+ hours validated
Water Tightness 16 Bar (Pass)
Pressure Resistance 25 Bar (Pass)
Warranty 10-Year Manufacturer Warranty

Installation Notes

Step-by-Step Installation

  1. Flush the supply line: Force water through the open wall outlet to clear construction debris, sand, and plumbing scale before fitting the spout
  2. Apply PTFE tape: Wind PTFE thread seal tape clockwise onto the 1/2" male wall pipe outlet for a leak-proof seal
  3. Slide on the flange: Thread the decorative chrome wall flange onto the rear of the spout shaft before connecting to the wall
  4. Thread and tighten: Carefully thread the spout onto the wall pipe by hand to avoid cross-threading, then tighten securely with the nozzle pointing straight down into the bathtub
  5. Test for leaks: Turn on the main valve and check that there is no water seeping behind the flange before finishing

Why Buy from HomeRun?

  • Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
  • 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for active plumbing and renovation projects
  • Project-Friendly Availability: Single-unit ordering for bathroom-by-bathroom procurement on residential and commercial fit-outs

FAQs

1) Does this spout have a built-in diverter to switch water to a shower head?

No - the SPJ-CHR-10429PM is a plain bathtub fill spout with no diverter. Water flows straight down into the bathtub only. Switching between the bathtub spout and a hand shower must be done via a separate concealed bath-shower diverter mixer valve. If you need a spout with a built-in hand shower connection, model SPJ-CHR-10463PM should be specified instead.

2) Will this spout work with a low-pressure overhead water tank?

Yes - the minimum operating pressure is 0.5 Bar, which most standard overhead tank setups meet. However, for a powerful, rapid bathtub filling experience, a sustained line pressure of 2.0 to 3.0 Bar is recommended. If your building's pressure is consistently below 0.5 Bar, a booster pump will significantly improve fill speed.

3) Can I clean the aerator if hard water blocks the stream?

Yes - the M 24x1 aerator can be unscrewed easily from the spout nozzle using a coin or aerator key. Soak it in vinegar or rinse under clean running water to dissolve calcium scale deposits, then screw it back in. Periodic aerator cleaning every few months is recommended in hard water areas to maintain a uniform, splash-free stream.

4) What is the manufacturer warranty on this product?

Jaquar covers this spout with a 10-year manufacturer warranty against casting defects and finish issues. Verify the warranty terms and customer service contact details on the physical label inside the retail package on delivery.

5) How do I maintain the chrome finish long-term?

Clean regularly with a soft microfiber cloth and mild soapy water only. Never use acidic toilet bowl cleaners, abrasive chemical powders, or rough scrubbing pads on the chrome surface - these scratch and permanently dull the mirror finish. After cleaning, wipe dry to prevent water spots from forming in hard water areas.

Returns & Exchange Policy

  1. Return within 72 hours of delivery for:
    • Damaged or defective product
    • Wrong or missing item
  2. Product cannot be returned once installed or used
  3. Refer to Refund Policy for complete details
ಸಂಪೂರ್ಣ ವಿವರಗಳನ್ನು ವೀಕ್ಷಿಸಿ
0

0 items

Rs. 0.00

View Cart