Ebco Pro Lift Bed Fitting - Extended Arm Set, Heavy Duty, PLBF-EF-E-HD

Product Highlights

• Manufacturer: Ebco
• Model: Pro Lift Bed Fitting - Extended Arm Set, Heavy Duty
• Article Code: PLBF-EF-E-HD
• Type: Heavy Duty, Easy Fit, Extended Arm bracket set
• Opening Angle: 30 degrees
• Finish: Anthracite
• What's Included: Extended arm bracket set only - hydraulic gas pump not included
• Hydraulic Gas Pump and Mounting Screw Kit: Sold separately - available in 150 kg and 200 kg variants

Product Description

Ebco Pro Lift Bed Fitting - Extended Arm Set (PLBF-EF-E-HD) is the heavy-duty extended arm bracket set for the Ebco Pro Lift hydraulic bed lift system - designed for storage beds with lift-up platforms where larger bed frames require extended arm support for correct weight distribution and platform stability. This listing is for the extended arm bracket set only - the hydraulic gas pump, which is required to complete the lift mechanism and must be purchased separately in either the 150 kg or 200 kg variant to match the combined weight of your bed platform and mattress. The extended arm design provides superior reach and support for king and queen-size bed platforms compared to standard arm variants, ensuring the platform lifts and stays elevated evenly across its full width without flex or tipping to one side.

The 30-degree opening angle allows comfortable access to the full under-bed storage area without requiring excessive vertical clearance above the bed in the room - the platform lifts to a stable, secure angle that allows both hands to be used freely for retrieving and organizing stored items. The Easy Fit design is engineered for straightforward installation on most standard bed frames - the bracket set is fixed to the bed base and platform, and the separately purchased hydraulic gas pump is connected to complete the lift mechanism. Finished in Anthracite, the hardware has a sleek, dark grey appearance that integrates cleanly with most bed frame materials and colour schemes without requiring concealment. The heavy-duty construction is rated for larger, heavier bed platforms where standard lift fittings are not adequate for the load.

Technical Specifications

Important - What is Included and What to Order Separately

Installation Guidelines

Recommended Applications

Why Buy from HomeRun?

FAQs

1) Is the hydraulic gas pump included in this listing?

No - this listing is for the extended arm bracket set (PLBF-EF-E-HD) only. The hydraulic gas pump is a separate purchase and must be ordered in addition to this bracket set to complete a functional bed lift mechanism. The gas pump is available in two variants - 150 kg and 200 kg - selected based on the combined weight of your bed platform panel and mattress. The bracket set alone does not hold the platform in the raised position; the gas pump provides the counterbalance force required for hands-free access to under-bed storage.

2) Why do I need the extended arm variant rather than the standard arm?

The extended arm variant is required for larger bed frames - king and queen size - where the standard arm length does not provide sufficient reach across the full platform width. Without extended arms, a standard fitting may support the platform unevenly, causing it to tilt or flex under load. The extended arm brackets distribute the lift force more evenly across the wider platform, ensuring stable, level elevation when the bed is in the raised position. If your bed is a standard double or smaller, confirm with your carpenter whether the extended or standard arm variant is the correct specification for your platform dimensions.

3) How do I choose between the 150 kg and 200 kg gas pump variants?

Estimate the combined weight of your bed platform panel and mattress. A standard 18-25mm plywood platform for a king size bed weighs approximately 25-40 kg; a memory foam or thick spring mattress for a king size bed can weigh 30-50 kg - bringing the combined load to 55-90 kg for a typical king size setup. The 150 kg pump suits lighter platform and mattress combinations; the 200 kg pump is recommended for heavier combinations including thick premium mattresses, heavy platform panels, or custom bed frames with additional weight. When in doubt, choose the higher-rated 200 kg pump - an over-rated pump is safer and easier to operate than an under-rated one.

4) What is the 30-degree opening angle and is it sufficient for under-bed access?

The 30-degree opening angle is the angle to which the bed platform rises from the horizontal position. At 30 degrees, the front edge of the platform lifts approximately 500-600mm above the bed base level (depending on the bed length) - sufficient to provide clear, unobstructed access to the full under-bed storage depth with both hands free. The 30-degree angle requires less vertical clearance above the bed than steeper-opening alternatives, making it suitable for rooms with lower ceilings or beds positioned close to overhead wardrobes or shelving.

5) Can this fitting be installed on any bed frame?

The Pro Lift Extended Arm fitting is designed for Easy Fit installation on most standard bed frames with a rigid base structure. The bed frame must be structurally sound and capable of supporting the combined weight of the platform, mattress, and stored items without flexing or racking when the platform is raised. Frames built from 18mm or thicker plywood, MDF, or solid timber are generally suitable. Lightweight flat-pack frames with thin particleboard bases may not provide adequate structural support for the lift mechanism under full load - confirm with your carpenter or furniture manufacturer before ordering if you are unsure of your frame's suitability.

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details