Ozone Glass Patch Fitting OPF-4

Name: Ozone Glass Patch Fitting OPF-4
Brand: HomeRun
SKU: 7QPWH
Price: 1590.0 INR
Availability: InStock

₹3,150

₹1,590

Assured 2% CashbackOn purchases above ₹50,000

Incl GST Shipping calculated at checkout.

Manufacturer: Ozone Secutech
Model: OPF-4 STD SSS
Type: Wall-mounted over-panel patch with pivot
Function: Anchors the over-panel to the wall and carries the door pivot
Glass Compatibility: Confirm thickness and cutout with your glass supplier
Pivot Point: Variable, 55 or 65 mm
Cover: SS Grade 304, secured with small ‘L’ key
Base: Aluminium alloy casting
Finish: Satin Stainless Steel (SSS)

Ozone Glass Patch Fitting OPF-4 is the wall-mounted over-panel patch with pivot — used where the fixed over-panel meets a wall rather than another glass panel.

The difference from the OPF-1 is what it fixes to. An OPF-1 connects glass to glass; the OPF-4 anchors into the wall while still carrying the door’s pivot. That covers the common situation where a glass entrance runs up against masonry or a structural column on one side.

Getting this right matters structurally. The pivot point takes the door’s swinging load thousands of times over its life, so the fixing into the wall has to be sound — this is not a fitting to mount into plasterboard without proper backing.

Key Features

Variable pivot point of 55 or 65 mm: Lets the fitter adjust where the door pivots, which is how a glass door is squared up on site
SS Grade 304 cover: Marine-grade stainless that holds its finish in humid conditions
Aluminium alloy cast base: Rigid body that keeps the door aligned under daily use
Cover secured with a small ‘L’ key: Fixings are not exposed to casual tampering

Technical Specifications

Technical Specifications (Quick Reference)

Specification	Details
Model	OPF-4 STD SSS
Type	Wall-mounted over-panel patch with pivot
Fixes To	Wall or structural column
Pivot Point	Variable, 55 or 65 mm
Cover Material	SS Grade 304
Base Material	Aluminium alloy casting
Finish	Satin Stainless Steel (SSS)

What Else You Will Need

A Frameless Glass Door Needs a Full Set

Top patch (OPF-2) at the top of the leading edge, with a top pivot in the overhead structure
Bottom patch (OPF-3) at the bottom, sitting onto the floor spring spindle
Floor spring such as the Ozone FS-8400, which carries the weight and controls the closing action
Patch lock for securing the door
Handles on both faces
All in the same series and finish — mixed hardware is very visible on frameless glass

Before You Order — Glass Preparation

Cutouts must be made before toughening. Toughened glass cannot be drilled or notched afterwards — it will shatter. Patch fittings require cutouts, so the glass must be ordered to suit
Confirm glass thickness and cutout drawing with your glass supplier before the panel is made
Patch fittings are a matched set. Keep the series and finish consistent across top patch, bottom patch, lock and floor spring

1) How is this different from the OPF-1?

What it fixes to. The OPF-1 connects glass to glass; the OPF-4 anchors into a wall while still carrying the door pivot. Use the OPF-4 where the glass entrance meets masonry or a column.

2) What sort of wall can it be fixed to?

It needs a structurally sound substrate — masonry, concrete or a properly backed partition. The pivot takes the door’s swinging load thousands of times, so plasterboard without backing is not adequate.

3) Does it carry the door’s weight?

It carries the pivot load at the top. The door’s weight is taken by the bottom patch and floor spring below.

4) Do I still need a top patch?

Yes, in most configurations. The top patch clamps the door leaf; this fitting anchors the surrounding panel and provides the pivot point.

5) What else do I need for the full door?

Typically a top patch, bottom patch, floor spring, patch lock and handles — all in the same series and finish.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once installed or used
Refer to Refund Policy for complete details