Archidply Decor Pure Classic Plus MR Plywood (Full Core)

Product Highlights

• Manufacturer: Archidply Decor Limited (ADL)
• Product: Decor Pure Classic Plus MR Plywood
• Grade: Moisture Resistant (MR) - Interior Grade
• Core Material: 100% Premium Hardwood, bonded with UF/MUF resin
• Available Sizes: 8' x 4' (32 sq. ft.) and 7' x 4' (28 sq. ft.)
• Available Thickness: 6mm, 8mm, 12mm, 16mm, and 18mm
• Application: Furniture, wall panelling, partitions, false ceilings, and interior joinery
• Warranty: 15 Years Manufacturer Warranty

Product Description

Archidply Decor Pure Classic Plus MR Plywood is a premium-quality, interior-grade Moisture Resistant (MR) plywood manufactured from selected hardwood veneers bonded with UF/MUF resin for superior strength, dimensional stability, and surface finish. Engineered for bespoke furniture, decorative wall panelling, structural partitions, and false ceilings in residential and commercial interiors, the core is built from uniform, high-density hardwood layers that deliver superior load-bearing capacity, impact resistance, excellent screw and nail-holding ability, and dimensional stability across all thickness variants from 6mm to 18mm.

The double-sanded, calibrated surface is ready for direct laminate, veneer, or polish application without additional preparation. The panels are chemically treated to resist wood-boring beetles, termites, and fungal attacks — protecting the woodwork against biological degradation over its service life. The adhesive system meets E1 low-formaldehyde emission standards, ensuring healthier indoor air quality in homes and offices. Available in 8' x 4' and 7' x 4' sheet sizes to suit standard and custom carpentry requirements, and manufactured to IS:303 (latest revision) for moisture resistant plywood. Backed by a 15-year manufacturer warranty against manufacturing defects and delamination.

Technical Specifications (Quick Reference)

Ply Construction

Thickness Selection Guide

Recommended Applications

Why Buy from HomeRun?

FAQs

1) What is the difference between MR grade and BWR/BWP grade plywood - which should I use for my project?

MR (Moisture Resistant) grade plywood is designed for interior applications where the wood will not be exposed to direct water, prolonged moisture, or outdoor conditions. It is suitable for furniture, wall panelling, false ceilings, and interior joinery in dry indoor environments. BWR (Boiling Water Resistant) or BWP (Boiling Water Proof) grades are required for areas with direct water exposure — such as kitchen sink cabinets, bathroom vanities, or any outdoor application. For standard interior furniture and modular kitchens away from water contact, MR grade is the correct and cost-effective choice.

2) Which thickness should I choose for wardrobe carcasses and kitchen cabinets?

18mm is the standard thickness for wardrobe and kitchen cabinet carcasses — sides, tops, and bottoms — where structural rigidity and screw-holding strength under load are required. 12mm is commonly used for internal shelves and dividers inside cabinets where the load is lower. 6mm or 8mm is used for back panels of cabinets and drawer bottoms where structural loading is minimal. Your carpenter or interior designer will specify the correct thickness for each component of the furniture design.

3) Is this plywood termite and borer resistant, and does that treatment last?

Yes — the Archidply Decor Pure Classic Plus is chemically treated during manufacturing to resist wood-boring beetles, termites, and fungal attacks. The treatment is applied to the core and face veneers during the pressing process, making it an integral part of the panel rather than a surface coating that can wear off. This protection remains effective throughout the panel's service life under normal interior conditions. The 15-year warranty covers delamination and manufacturing defects, which provides an additional assurance of panel quality.

4) What does E1 emission standard mean and why does it matter for indoor use?

E1 is an international standard for formaldehyde emission from wood-based panels. Formaldehyde is used in the adhesive resins that bond the wood layers together. At high emission levels, it can cause eye and respiratory irritation and is classified as a health hazard in enclosed spaces. E1 certified panels emit formaldehyde at or below 0.1 ppm — a level considered safe for residential and commercial indoor use. This is particularly important for bedrooms, children's rooms, and enclosed spaces with limited ventilation where furniture occupies a significant portion of the room volume.

5) Can this plywood be directly laminated or veneered without additional surface preparation?

Yes — the double-sanded, calibrated smooth surface of the Archidply Decor Pure Classic Plus is specifically designed for direct laminate, wood veneer, or polish application without sanding or filling. The factory-calibrated surface ensures consistent thickness across the sheet, which is critical for even adhesive spread and wrinkle-free laminate bonding. Your carpenter should clean the surface of dust before applying adhesive. For high-gloss polish or thin veneers, a light sanding with fine grit (180-220) is recommended to remove any handling marks before finishing.

Returns & Exchange Policy

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once cut, installed, or used
3. Refer to Refund Policy for complete details