Electrical Wire Price List Bangalore (Polycab, Finolex by Gauge)
Last Updated: April 2026. Prices are indicative and subject to change. Always verify the latest prices on HomeRun's official wires page before purchasing.
Summary
- For home wiring, always choose FR-LSH (Flame Retardant Low Smoke Halogen Free) wire over basic FR wire for superior fire safety.
- Match wire gauge to the electrical load to prevent fire hazards: use 1.0 sq mm for lights, 2.5 sq mm for power sockets, and 4.0 sq mm for ACs and geysers.
- A typical 1,000-1,200 sq. ft. 2BHK flat requires approximately 350-450 metres of wire (4-6 coils) across various gauges.
- Avoid counterfeit products and project delays by sourcing genuine, ISI-certified Polycab and Finolex electrical wires from HomeRun, delivered in 60 minutes across Bangalore.
You've done the research, shortlisted Polycab and Finolex, and now you just need one thing: a straight answer on what these wires actually cost in Bangalore — by gauge, by coil length, without the runaround. This guide gives you exactly that.
Beyond the price list, we'll also decode the spec jargon (FR vs. FRLS vs. FR-LSH), explain which gauge goes where in a home, and help you estimate how much wire a standard 2BHK in Bangalore actually needs.
Polycab & Finolex Wire Price List — Bangalore (Updated April 2026)
The table below covers both Polycab Maxima+ FRLS-H and Finolex Flamegard FR-LSH wires — the two most commonly specified FR-LSH brands for residential wiring in Bangalore — along with key variants, across gauges from 1mm to 6mm.
| Brand & Model | Gauge (sq mm) | Coil Length | Price (₹) |
|---|---|---|---|
| Polycab Maxima+ Green HR FR-LSH LF | 1.0 | 90m | Check Price ↗ |
| Polycab Maxima+ Green HR FR-LSH LF | 1.5 | 90m | Check Price ↗ |
| Polycab Maxima+ Green HR FR-LSH LF | 2.5 | 90m | Check Price ↗ |
| Polycab Maxima+ Green HR FR-LSH LF | 4.0 | 90m | Check Price ↗ |
| Polycab Maxima+ Green HR FR-LSH LF | 6.0 | 90m | Check Price ↗ |
| Polycab FRLS-H Single Core Wire | 1.0 | 300m | Check Price ↗ |
| Finolex Flamegard FR-LSH Wire | 1.0 | 90m | Check Price ↗ |
| Finolex Flamegard FR-LSH Wire | 1.5 | 90m | Check Price ↗ |
| Finolex Flamegard FR-LSH Wire | 2.5 | 90m | Check Price ↗ |
| Finolex Flamegard FR-LSH Wire | 4.0 | 90m | Check Price ↗ |
| Finolex Flamegard FR-LSH Wire | 6.0 | 90m | Check Price ↗ |
| Finolex Silver FR Wire | 1.0 | 90m | Check Price ↗ |
| Finolex FR Wire | 1.0 | 300m | Check Price ↗ |
| Finolex Speaker Cable | 1.5 | 100m | Check Price ↗ |
⚠️ Note: HomeRun does not stock Havells wires. Prices for mid-range gauges (1.5mm–6mm) vary and are updated in real time — check our live Finolex wire price list or click through to the product pages for the exact current price before purchasing.
Understanding Wire Specifications: FR, FRLS, FR-LSH, ISI, and Gauge Explained
If you've ever stood in a hardware store staring at rolls of wire wondering what "FRLS-H" even means — you're not alone. Here's a plain-English breakdown.
FR vs. FRLS vs. FR-LSH: Which One Do You Actually Need?
These three acronyms describe how a wire behaves in a fire. The differences matter more than most people realise:
- FR (Flame Retardant): The basic standard. Slows the spread of flames but releases thick, black, toxic smoke. Fine for low-risk external conduits or industrial use. Example: Finolex Silver FR Wire.
- FRLS (Flame Retardant Low Smoke): Emits significantly less smoke when burning. Better visibility during a fire means better evacuation outcomes. A solid mid-range option for enclosed residential spaces.
- FR-LSH (Flame Retardant Low Smoke Halogen Free): The gold standard for home wiring. It doesn't just reduce smoke — it eliminates the release of toxic halogen gases, which are far more dangerous to inhale than smoke alone. As one electrician noted on Reddit, "go for FRLS-H if you're not worried about cost" — and for any bedroom, kitchen, or high-rise application, the cost difference is genuinely worth it. Examples: Polycab Maxima+ Green HR FR-LSH LF and Finolex Flamegard FR-LSH Wire.
Recommendation for Bangalore homes: Specify FR-LSH for all internal wiring. The price premium over standard FR wire is modest on a per-coil basis, and it's a non-negotiable safety upgrade.
Why ISI Certification Is Non-Negotiable
The ISI mark (from the Bureau of Indian Standards) is your assurance that a wire has been tested and meets Indian safety standards for conductor resistance, insulation thickness, current-carrying capacity, and fire performance. Non-ISI wires are a documented fire hazard — and using them can also void your home insurance policy in the event of an electrical fire.
Both Polycab Maxima+ and Finolex Flamegard are ISI-certified. Always verify the mark is present on the wire drum or coil label before buying.
Choosing the Right Wire Gauge for Each Circuit
Wire gauge (measured in sq mm) refers to the cross-sectional area of the copper conductor. Thicker wire = more copper = higher safe current capacity. Using undersized wire for a high-load circuit is a leading cause of residential electrical fires. Here's the straightforward guide:
| Gauge | Typical Application |
|---|---|
| 1.0 sq mm | Light points (LED bulbs, CFLs) |
| 1.5 sq mm | Ceiling fans, low-power sockets (phone chargers, TVs) |
| 2.5 sq mm | Power sockets (microwave, mixer, computer, AC sub-circuit) |
| 4.0 sq mm | Air conditioners (up to 1.5 ton), geysers |
| 6.0 sq mm | Main feed from meter to distribution board; heavy-load appliances |
As multiple electricians on forums like r/AskElectricians point out: "the wire type matters for the amount of current/load it has to carry." When in doubt, always consult your electrician — they'll size the wire to your actual load, not just a generic estimate.
How Much Wire Does a 2BHK in Bangalore Need?
This is the question most guides skip. Here's a practical, circuit-by-circuit breakdown for a standard 2BHK flat (approx. 1,000–1,200 sq. ft.) in Bangalore.
Disclaimer: These are general estimates. Your actual requirement will depend on flat layout, number of points, and distance from the distribution board. Always have your electrician prepare a detailed wiring plan before purchasing.
Circuit-by-Circuit Wire Estimate
1. Lighting Circuit — 1.0 sq mm FR-LSH wire
Covers all ceiling light points, wall lights, and passage lights. A typical 2BHK has 10–14 light points across rooms, kitchen, bathrooms, and balcony.
- Estimated quantity: 90–120 metres (1–1.5 coils of 90m)
2. Fan Circuit — 1.5 sq mm FR-LSH wire
Ceiling fans in bedrooms, living room, and kitchen. Plan for 4–6 fan points.
- Estimated quantity: 60–90 metres (1 coil of 90m covers this comfortably)
3. Power Socket Circuit — 2.5 sq mm FR-LSH wire
All general-purpose 5A and 15A sockets across bedrooms, living room, and kitchen (for appliances like mixers, microwaves, and computers).
- Estimated quantity: 80–100 metres (1 coil of 90m, with some on a second)
4. AC & Geyser Circuit — 4.0 sq mm FR-LSH wire
Dedicated circuits for each air conditioner and geyser. A 2BHK typically has 1–2 ACs and 1–2 geysers.
- Estimated quantity: 80–120 metres (1–2 coils, depending on the number of units and distance from the DB)
5. Main Feed / Distribution Board — 6.0 sq mm wire
The supply line running from your electricity meter to your main distribution board. This is typically a short run but needs the thickest gauge.
- Estimated quantity: 10–20 metres
Summary Table: 2BHK Wire Estimate
| Circuit | Gauge | Est. Quantity | Approx. Coils Needed |
|---|---|---|---|
| Lighting | 1.0 sq mm | 90–120m | 1–2 × 90m coils |
| Fans | 1.5 sq mm | 60–90m | 1 × 90m coil |
| Power Sockets | 2.5 sq mm | 80–100m | 1–2 × 90m coils |
| AC & Geyser | 4.0 sq mm | 80–120m | 1–2 × 90m coils |
| Main Feed | 6.0 sq mm | 10–20m | 1 × 90m coil (shared) |
Total estimate: 4–6 coils across all gauges, roughly 350–450 metres of wire. For a full FR-LSH setup using Polycab Maxima+ or Finolex Flamegard, budget accordingly — and factor in 10–15% extra for unforeseen runs, loops, and corrections.
One note from the r/Bengaluru community: contractors sometimes mark up material costs by 26–33% and it's worth verifying against published retail prices independent of your contractor's quote. The electrical wire price list Bangalore homeowners actually need is one where prices are transparent, published, and verifiable — exactly what we've tried to provide here.
Get Genuine Wires Delivered in 60 Minutes — No Counterfeits, No Project Delays
You've now got the prices, the specs, and the quantity estimates. The last piece is sourcing the right wire without getting stuck in traffic to Chickpet or waiting two days for a delivery.
This is where HomeRun comes in.
HomeRun is Bangalore's quick commerce platform for construction materials — think Blinkit or Zepto, but for electrical wires, cement, plywood, and everything else a construction or renovation project needs. Here's why electricians and homeowners across Bangalore are switching to it:
✅ 100% Genuine, ISI-Certified Wires — Guaranteed
Counterfeit electrical wire is a genuine and widespread problem in India. Substandard wire with insufficient copper, fake ISI markings, or degraded insulation is not just a scam — it's a fire waiting to happen. HomeRun sources exclusively from authorised Polycab and Finolex dealers, so every coil you receive is 100% genuine, fully warranted, and ISI-certified. No shortcuts.
✅ Transparent, Competitive Pricing
The prices you've seen in this guide are what you pay. No opaque contractor markups, no "company ka rate hai, sir" pricing. Browse HomeRun's wires collection directly and see exactly what each gauge and coil length costs before you order.
✅ 60-Minute Delivery to Your Project Site
Worker idle time is money lost. A missing coil of 4mm wire no longer needs to bring your project to a halt for a day. HomeRun delivers to 105+ Bangalore pin codes — from Whitefield and Marathahalli in the east, to Jayanagar and JP Nagar in the south, Yelahanka in the north, and Rajajinagar in the west — using a dedicated electric vehicle fleet. Most deliveries arrive within 60 minutes.
Frequently Asked Questions
What is the best type of electrical wire for home wiring in India?
For home wiring in India, the best and safest option is FR-LSH (Flame Retardant Low Smoke Halogen Free) wire. This type of wire not only slows the spread of fire but also emits minimal smoke and, crucially, does not release toxic halogen gases, which are extremely dangerous to inhale during a fire. Brands like Polycab Maxima+ and Finolex Flamegard offer high-quality FR-LSH wires suitable for all residential applications.
Which brand is better: Polycab or Finolex?
Both Polycab and Finolex are highly reputable brands that manufacture ISI-certified wires, making both excellent choices for residential wiring. The decision often comes down to electrician preference, local availability, and slight price variations. Polycab's Maxima+ Green HR FR-LSH and Finolex's Flamegard FR-LSH are directly comparable in terms of safety standards and quality. The most important factor is to ensure you are buying genuine products from an authorised source.
How much wire is needed for a 2BHK house?
A typical 1,000–1,200 sq. ft. 2BHK flat in Bangalore generally requires between 350 and 450 metres of wire, which translates to about 4 to 6 standard 90m coils across various gauges. This includes wiring for lighting (1.0 sq mm), fans (1.5 sq mm), power sockets (2.5 sq mm), and heavy appliances like ACs and geysers (4.0 sq mm). Always consult your electrician for a precise measurement based on your specific layout.
Why is using the correct wire gauge important?
Using the correct wire gauge is critical for safety because it ensures the wire can handle the electrical current of the circuit without overheating. An undersized wire for a high-load appliance (like using a 1.5 sq mm wire for an AC) will overheat, melt its insulation, and can cause a short circuit or an electrical fire. Following the standard recommendations—1.0mm for lights, 2.5mm for power sockets, 4.0mm for ACs—is a non-negotiable safety practice.
Can I use one size of wire for my entire house?
No, you cannot use a single wire size for your entire house. Different circuits have different electrical loads and require specific wire gauges for safety and efficiency. For instance, lighting circuits carry a low current and are fine with 1.0 sq mm wire, while an air conditioner needs a much thicker 4.0 sq mm or 6.0 sq mm wire to handle its high power draw safely.
Where can I buy genuine Polycab and Finolex wires in Bangalore?
You can buy 100% genuine Polycab and Finolex wires from authorised dealers or trusted platforms like HomeRun, which sources directly from these dealers. To avoid the risk of counterfeit wires, which are a major fire hazard, it is essential to purchase from a verifiable source. Platforms like HomeRun offer the added benefit of transparent pricing and fast delivery directly to your project site in Bangalore.
Ready to Wire Your Home?
Get ISI-certified Polycab and Finolex wires delivered to your Bangalore site in the next 60 minutes.
👉 Order on WhatsApp: +91 8088321083 Or browse the full range at home-run.co/collections/wires
Open 8am–8pm, all days. 105+ serviceable pin codes across Bangalore.
Prices in this electrical wire price list Bangalore guide are last updated April 2026 and are subject to change. Verify current prices at home-run.co/collections/wires before placing an order.
