Modular Fan Cover Cap for Ceiling Fan Installation

• Brand: Generic
• Product: Modular Fan Cover Cap for Ceiling Fan Installation
• Dimensions (Dia x H): 120 x 5 mm (4.7" x 0.2")
• Central Knock-Out: Approx. 37 mm (1.5") – remove it to slide over a standard 1" (25.4 mm) outer diameter ceiling fan downrod; leave it in place to use as a dummy cover
• Material: High-grade PVC, non-conductive
• Colour: White
• Design: Round, slim plate with raised rim and 2 fixing holes
• Packaging: 01 Nos
• Application: Hiding ceiling cutouts around fan rods, or covering unused ceiling junction boxes
• Please Note: Brand may vary from the images shown, subject to stock availability. Specifications remain the same.

This Modular Fan Cover Cap gives a neat, finished look to your ceiling fan installation. When the fan canopy doesn't fully hide rough plaster or an oversized hole made during construction, this 12 cm round cover cap hides the gap cleanly. Simply remove the central knock-out and slide it over a standard 1" (25.4 mm) downrod.

Made from non-conductive PVC in a clean white finish, it blends in with standard ceilings and fan fittings. With the central knock-out left in place, it also works as a flat dummy cover to neatly close off unused ceiling junction boxes. Two fixing holes let you screw it firmly to the ceiling box. The plate is a cover only – it does not carry any of the fan's weight, which must always hang from a proper ceiling fan hook.

Product Specifications Table

Recommendations & Ideal Use-Cases

Installation & Safety

1) What is this cover used for?

The fan cover cap hides rough ceiling cutouts and plaster gaps around a fan downrod, or neatly covers an unused ceiling junction box for a clean, finished look.

2) What size is it?

It is a round plate, 12 cm (120 mm) in diameter and 0.5 cm (5 mm) thick – large enough to cover most oversized fan holes and standard ceiling box openings.

3) Will it fit my fan rod?

Yes, for standard rods. Once the central knock-out is removed, the approx. 37 mm (1.5") opening provides clearance to slide over a standard 1" (25.4 mm) outer diameter ceiling fan downrod. If your fan has a thicker downrod, measure it before ordering.

4) Can I use it as a closed cover?

Yes. The centre is a knock-out, so it stays closed until you push it out. Leave it in place to use the plate as a flat dummy cover over an unused ceiling junction box.

5) Is it safe over electrical points?

Yes. PVC is non-conductive, so it is a safe cover material. When using it to cover an unused junction box, any live wires inside must first be properly terminated and insulated by an electrician.

6) Can it be used outdoors?

It is made for indoor ceilings and covered outdoor areas such as balconies and porches, where it is protected from direct rain and strong sunlight.

7) Can I paint it to match my ceiling?

Yes. Lightly sand the surface and apply a plastic-compatible primer before painting it in your ceiling colour.

8) Will I receive the same brand as shown in the images?

The brand supplied is subject to stock availability and may differ from the images on our website and app. All supplied products meet the same specifications.

Why Buy from HomeRun?

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed, altered or used
3. Refer to Refund Policy for complete details