TP-Link LS110P 10-Port Gigabit PoE+ Switch

Name: TP-Link LS110P 10-Port Gigabit PoE+ Switch
Brand: HomeRun
SKU: X5MBR
Price: 2399.0 INR
Availability: InStock

₹4,999

₹2,399

Assured 2% CashbackOn purchases above ₹25,000

Incl GST Shipping calculated at checkout.

Manufacturer: TP-Link
Model: LS110P (LiteWave series)
Ports: 10× 10/100 Mbps, of which 8 are PoE+
PoE Budget: 96 W total, up to 30 W per port
Standard: IEEE 802.3af/at PoE+
Extend Mode: PoE and data up to 250 m
Management: Unmanaged — plug and play
Please note: These are 10/100 Mbps ports, not Gigabit
Warranty: 3 Years

TP-Link LS110P is a 10-port desktop PoE switch with 8 PoE+ ports and a 96 W budget — a compact, fanless unit sized for a small camera system or a handful of access points.

It sits in a useful gap. A 5-port switch runs out of ports the moment a site grows; an 18-port rackmount unit needs a rack and is overkill for eight cameras. The LS110P handles a typical small-premises install — a shop, a clinic, a small office, a home with perimeter cameras — from a desktop or wall mount, silently.

The 96 W budget across 8 PoE ports averages 12 W per device, which comfortably covers standard fixed cameras and most indoor access points. Extend Mode reaches 250 m for a camera at the end of a long run, at the cost of dropping those ports to 10 Mbps.

Key Features

96 W across 8 PoE+ ports: Around 12 W per device on average — ample for fixed cameras
Up to 30 W on a single port: Handles a higher-draw device where needed
Extend Mode to 250 m: Reaches past the 100 m Ethernet limit
Fanless and silent: Suitable for an office or reception where a fan would be audible
Desktop or wall mount: No rack needed
Plug and play: No configuration or software

Technical Specifications

Technical Specifications (Quick Reference)

Specification	Details
Model	LS110P
Total Ports	10× 10/100 Mbps
PoE Ports	8× 802.3af/at PoE+
Total PoE Budget	96 W
Max Per Port	30 W
Extend Mode	Up to 250 m (ports drop to 10 Mbps)
Management	Unmanaged
Cooling	Fanless
Mounting	Desktop or wall

Please Check the Port Speed

The LS110P has 10/100 Mbps ports, not Gigabit. TP-Link lists it as a "10-Port 10/100Mbps Desktop Switch with 8-Port PoE+"
For standard IP cameras that is ample — a 1080p camera stream is a few Mbps
If you need Gigabit PoE, look at the LS108GP (8 Gigabit PoE+ ports, 62 W) or LS105GP (4 Gigabit PoE+ ports, 65 W) instead
Budget is the number that matters. Add up what your devices draw and stay under the switch total, or ports will shut down
Use Cat5e or better. PoE performance and reach depend on cable quality more than anything else
Extend mode trades speed for distance. It reaches 250 m but drops those ports to 10 Mbps — fine for a standard camera, not for high-bitrate video

1) Are these Gigabit ports?

No. The LS110P has 10/100 Mbps ports. For IP cameras that is normally plenty, since a 1080p stream is only a few Mbps. If you need Gigabit PoE, the LS108GP or LS105GP are the LiteWave models to look at.

2) How many cameras can it power?

Up to 8 PoE devices within a 96 W total budget. A typical fixed camera draws 4–8 W, so eight is realistic with headroom to spare.

3) Do the two non-PoE ports still work?

Yes — all 10 ports carry data. Two of them simply do not supply power, so use those for your recorder or router uplink.

4) Is it noisy?

No. It is fanless, so it makes no sound at all — which matters if it sits in a reception area or a small office rather than a comms cupboard.

5) Do I need to configure anything?

No. It is unmanaged and plug and play. Extend Mode is enabled by a hardware switch on the unit.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once installed or used
Refer to Refund Policy for complete details

tp-link ls110p 10 port poe switch 8 port poe+ 96w budget litewave ip camera cctv desktop fanless bangalore