Popup Image
1 1

MYK Laticrete 303 Grey Tile Adhesive, 20Kg Bag

MYK Laticrete 303 Grey Tile Adhesive, 20Kg Bag

स्टॉक में

Rs. 240.00
Rs. 515.00 Rs. 240.00
बिक्री बिक गया
Incl GST शिपिंग की गणना चेकआउट पर की जाएगी।

Product Highlights

  • Manufacturer: MYK Laticrete India Pvt. Ltd.
  • Product: LATICRETE® 303 Floor and Wall Tile Adhesive
  • Type: Single-Component Polymer-Based Economy Thin-Set Mortar
  • Pack Size: 20 kg bag
  • Colour: Grey
  • Standards: IS 15477:2019 Type 1T, EN 12004 / ISO 13007 C1T, Meets ANSI A118.1 T
  • Application: Interior wall and floor tile installations in dry areas

Product Description

MYK Laticrete LATICRETE® 303 is a factory-blended, single-component, polymer-modified economy thin-set mortar for interior tile installations on stable masonry substrates. Add clean water, mix to a smooth paste, and apply - no on-site blending of multiple components required. Provides excellent tack, non-sag performance, and spreadability for fixing standard ceramic tiles and small-format natural stones on cement mortar beds, cement plaster, brick masonry, and cement terrazzo. Practically nil VOC. Suitable for interior dry area residential and commercial projects where reliable, code-compliant performance is required at an economical cost.

Key Features

  • Single-component - just add water: No on-site blending of multiple materials - reduces handling errors and labour time
  • Economical formulation: Budget-friendly polymer-modified mortar optimised for standard interior ceramic tile projects
  • Good substrate adhesion: Bonds securely to cement plaster, brick walls, terrazzo, and concrete floor beds
  • Non-sag and spreadable: Smooth, workable consistency for easy application and tile alignment
  • Practically nil VOC: Safer indoor air quality for enclosed residential and commercial spaces

Technical Specifications

Technical Specifications (Quick Reference)

Specification Details
Manufacturer MYK Laticrete India Pvt. Ltd.
Product LATICRETE® 303 Floor and Wall Tile Adhesive
Chemical Form Polymer-Modified Cementitious Powder
Colour Grey
Pack Size 20 kg bag
Standards IS 15477:2019 Type 1T, EN 12004 / ISO 13007 C1T, Meets ANSI A118.1 T
VOC Content Practically Nil

Application Guidelines

Step-by-Step Application

  1. Surface preparation: Substrate must be structurally sound, fully cured, dry, and free from laitance, sealers, oils, and dust.
  2. Mix: Add 5 to 5.5 litres of clean water to a clean bucket, slowly add the powder, and mix with a slow-speed paddle until smooth and lump-free. Slake for 5 minutes, then remix briefly before use.
  3. Spread: Press the mortar firmly into the substrate with the flat trowel edge, then comb horizontally with a square-notched trowel to form uniform ridges.
  4. Set tiles: Bed tiles into the wet ridges within 10 minutes. Tap firmly with a rubber mallet for full, hollow-free coverage.

Recommended Applications

Where LATICRETE® 303 fits best

  • Interior floor tiles: Standard-format ceramic tiles in living rooms and bedrooms on concrete floor beds
  • Interior wall tiles: Kitchen backsplashes and bathroom walls over dry cement plaster, terrazzo, or brick masonry
  • Small-format natural stone: Small natural stone elements and interior mosaic border strips on stable masonry bases

Why Buy from HomeRun?

  • Authentic MYK Laticrete Product: Factory-verified genuine construction chemicals inventory
  • 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for running renovation sites
  • Project-Friendly Availability: Single bag ordering - no forced bulk minimum

FAQs

1) Can LATICRETE® 303 be used for exterior cladding on high-rise buildings?

No - it is engineered for interior dry area installations only. For exterior facades exposed to wind loads and weather, higher-flex polymer formulations such as LATICRETE® 325 or 335 must be specified instead.

2) Can I substitute the mixing water with a latex admix for better performance?

Yes - replacing plain water with a MYK Laticrete latex admix will enhance bond strength, flexibility, and shock absorption of the mortar bed, upgrading performance for more demanding applications.

3) Is this suitable for large-format vitrified tiles or tile-on-tile installations?

No - LATICRETE® 303 is an economy thinset optimised for small to medium ceramic formats and small natural stones. Large-format vitrified tiles or tile-on-tile applications require a higher-grade modification such as LATICRETE® 315 Plus or 325.

4) How much water do I add to one 20 kg bag?

Add approximately 5 to 5.5 litres of clean water per 20 kg bag. Mix with a slow-speed paddle until smooth and lump-free, allow 5 minutes to slake, then remix briefly before applying to the substrate.

5) How long after laying can the tiles be walked on?

Avoid foot traffic until the adhesive has achieved sufficient initial set - typically 24 hours under normal site conditions. Allow full cure before grouting. Curing time may be longer in cold or humid conditions.

Returns & Exchange Policy

  1. Return within 24 hours of delivery for:
    • Damaged or defective product
    • Wrong or missing item
  2. Product cannot be returned once opened or used
  3. Refer to Refund Policy for complete details
पूरा विवरण देखें
0

0 items

Rs. 0.00

View Cart