0 items
Rs. 0.00
Jaquar Premium Wall Mounted Bathtub Spout with Wall Flange
Jaquar Premium Wall Mounted Bathtub Spout with Wall Flangeस्टॉक ख़त्म
नियमित रूप से मूल्य
Rs. 1,584.00
नियमित रूप से मूल्य
Rs. 2,050.00
विक्रय कीमत
Rs. 1,584.00
यूनिट मूल्य
₹0.0/
Incl GST
शिपिंग की गणना चेकआउट पर की जाएगी।
पिकअप उपलब्धता लोड नहीं की जा सकी
Product Highlights
- Manufacturer: Jaquar India
- Product: Wall Mounted Bathtub Spout with Wall Flange
- Variants Available: Opal Prime (SPJ-CHR-15429PM), Kubix Prime (SPJ-CHR-35429PM), Alive (SPJ-CHR-85429)
- Material: Solid Brass
- Finish: Polished Chrome - Nickel 10.0µm, Chrome 0.3µm electroplated
- Corrosion Protection: 500+ hour salt spray validated
- Includes: Wall spout body and matching decorative wall flange
- Application: Wall-mounted bathtub filling in luxury residential and hotel bathrooms
Important - Spout and Flange Only
This listing includes the wall spout body and decorative wall flange only. The internal in-wall mixer valve must be purchased separately. This spout does not include a built-in diverter - water flow is controlled via the concealed mixer valve.
Product Description
Jaquar Premium Wall Mounted Bathtub Spout Series provides high-volume wall-mounted water delivery for luxury bathtub installations. Machined from solid brass conforming to IS:1264-1997 and IS:319-1989, each spout mounts flush against finished bathroom tiles with an integrated slide-on wall flange that conceals the raw wall pipe outlet for a clean, seamless finish. The certified M 24x1 Neoperl aerator (WRAS and ACS approved) mixes air into the stream for a splash-free, foam-rich bathtub filling experience. Available in three design styles - Opal Prime (soft cylindrical curves), Kubix Prime (sharp square geometry), and Alive (fluid organic form).
The chrome finish is electroplated to 10.0µm Nickel and 0.3µm Chrome, validated to 500+ hours salt spray resistance for long-term corrosion protection in humid bathroom environments. The spout does not include a built-in diverter - water switching between the bathtub spout and shower is controlled via the concealed mixer valve. The in-wall mixer valve is sold separately.
Key Features
- Integrated wall flange: Slide-on chrome flange masks the raw wall pipe outlet for a clean, gap-free finish against tiles
- WRAS and ACS certified Neoperl aerator: M 24x1 aerator produces a splash-free, foam-rich stream into the bathtub
- 500+ hour salt spray validated chrome: 10.0µm Nickel and 0.3µm Chrome electroplating resists tarnishing and corrosion in humid bathrooms
- Solid brass construction: Machined from IS:1264-1997 and IS:319-1989 certified brass for long-term pressure resistance
- 3 design styles: Opal Prime, Kubix Prime, and Alive - additional finishes available including Antique Bronze, Black Matt, Blush Gold, and Graphite
Design Variant Comparison
| Specification | Opal Prime (SPJ-CHR-15429PM) | Kubix Prime (SPJ-CHR-35429PM) | Alive (SPJ-CHR-85429) |
|---|---|---|---|
| Design Style | Soft cylindrical curves | Sharp square / geometric | Fluid organic form |
| Flow Rate @ 3 Bar | 17.18 LPM | 17.18 LPM | 22.81 LPM |
| Operating Pressure | 0.5 - 5.0 Bar | 0.5 - 5.0 Bar | 0.5 - 5.0 Bar |
| Aerator | M 24x1 (WRAS and ACS) | M 24x1 (WRAS and ACS) | M 24x1 (WRAS and ACS) |
| Chrome Plating | Ni 10.0µm / Cr 0.3µm | Ni 10.0µm / Cr 0.3µm | Ni 10.0µm / Cr 0.3µm |
| Salt Spray Rating | 500+ hours | 500+ hours | 500+ hours |
| Water Tightness | 16 Bar (Pass) | 16 Bar (Pass) | 16 Bar (Pass) |
| Pressure Resistance | 25 Bar (Pass) | 25 Bar (Pass) | 25 Bar (Pass) |
Installation Notes
Important - Read Before Installation
- Wall connection: The wall pipe outlet must have a standard 1/2" BSP male thread for the spout to connect correctly
- Flush the supply line first: Force water through the open wall outlet to clear sand, plaster debris, and thread tape residue before fitting the spout
- Apply PTFE tape: Wind PTFE plumbing thread seal tape clockwise on the male wall nipple before threading on the spout for a leak-proof seal
- Fit the flange: Slide the decorative chrome wall flange down the spout shaft before connecting to the wall - seat it flush against the tile surface after tightening
- Nozzle orientation: Ensure the spout exit nozzle points directly downward into the bathtub when tightened
- Aerator maintenance: Periodically unscrew the M 24x1 aerator tip to rinse out mineral sediment - keeps the water stream uniform
- In-wall mixer valve required: Purchase the compatible Jaquar concealed mixer valve separately to control water flow and temperature
Why Buy from HomeRun?
- Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for active plumbing and renovation projects
- Project-Friendly Availability: Single-unit ordering for bathroom-by-bathroom procurement on residential and commercial fit-outs
FAQs
1) Does this spout have a built-in diverter to switch water to a shower head?
No - this is a plain bathtub fill spout with no integrated diverter or pull-up tip. Water flows straight down into the bathtub only. Switching water between the bathtub spout and a shower head must be done via the wall-concealed mixer valve, which is purchased and installed separately. If you need a spout with a built-in diverter, a different model must be specified.
2) What should I do if the water stream starts to splash or split unevenly?
This is typically caused by hard water scale or debris blocking the aerator mesh. Unscrew the M 24x1 aerator tip from the spout nozzle, rinse out any mineral deposits under running water, and screw it back in. This simple maintenance step restores the smooth, foam-rich stream. Periodic cleaning every few months is recommended in hard water areas.
3) Are these spouts available in finishes other than chrome?
Yes - beyond the standard Polished Chrome (CHR), these spouts are available in premium optional finishes including Antique Bronze (ABR), Antique Copper (ACR), Blush Gold (BGP), Black Matt (BLM), and Graphite (GRF). Contact your Jaquar dealer or the HomeRun team to enquire about availability in your preferred finish.
4) Will this spout work with a low-pressure gravity-fed overhead water tank?
The minimum operating pressure is 0.5 Bar, which most standard overhead tank setups meet. However, for a truly rich, high-volume bathtub filling experience, a sustained line pressure of 2.0 to 3.0 Bar is recommended. If your building's water pressure is consistently at or below 0.5 Bar, a pressure booster pump will significantly improve fill speed and stream quality.
5) What is the wall flange included with this spout and what does it do?
The wall flange is a decorative chrome slide-on backing plate supplied with the spout. It sits between the spout body and the tile surface, covering the raw hole where the supply pipe exits the wall. Without the flange, the gap around the pipe outlet would be visible. The flange creates a clean, seamless finish against the tile and is simply slid down the spout shaft before the spout is threaded onto the wall pipe.
Returns & Exchange Policy
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
- चयन चुनने पर पूरा पृष्ठ रीफ़्रेश हो जाता है.
- एक नई विंडो में खुलता है।
