0 items
Rs. 0.00
Finolex CAT6 LAN Cable, 100m Coil
Finolex CAT6 LAN Cable, 100m Coilस्टॉक ख़त्म
नियमित रूप से मूल्य
Rs. 4,138.00
नियमित रूप से मूल्य
Rs. 5,495.00
विक्रय कीमत
Rs. 4,138.00
यूनिट मूल्य
₹0.0/
Incl GST
शिपिंग की गणना चेकआउट पर की जाएगी।
पिकअप उपलब्धता लोड नहीं की जा सकी
Product Highlights
- Manufacturer: Finolex
- Product Type: LAN Cable - CAT 6 UTP (Unshielded Twisted Pair)
- Specification: 0.5 x 4P UTP
- Length: 100 Metres
- Available Colours: Yellow, Grey
- Conductor: 23 AWG Annealed Bare Solid Copper
- Certifications: ANSI/TIA-568C.2, ETL Verified, UL Listed and Verified for CAT 6
- Application: Corporate IT, smart homes, IP CCTV, PoE installations
Product Description
Finolex CAT 6 UTP LAN Cable is a 100-metre networking cable built with a 23 AWG annealed bare solid copper conductor - not copper-clad aluminium (CCA) - ensuring full conductivity, lower resistance, and long-term signal integrity. The four twisted pairs are insulated with High-Density Polyethylene and separated by a Low-Density Polyethylene spine separator that isolates each pair, reducing crosstalk and electromagnetic interference at frequencies up to 250 MHz. This makes it capable of supporting Gigabit Ethernet (1000BASE-T) and high-bandwidth applications without signal degradation.
The outer jacket is a Fire Retardant PVC Compound (FRPVC) rated to 75 degrees C - self-extinguishing and resistant to physical wear in indoor routing environments. Fully certified to ANSI/TIA-568C.2 standards and verified by both ETL and UL for CAT 6 performance - confirming it meets internationally recognised structured cabling benchmarks. Suitable for structured cabling in offices, data centres, smart homes, IP CCTV installations, and any PoE (Power over Ethernet) application requiring reliable data and power delivery over a single cable.
Key Features
- 100% solid copper conductor - 23 AWG: Pure annealed bare copper - not CCA - delivers superior conductivity, lower DC resistance, and long-term structural integrity
- 250 MHz frequency rating - Gigabit Ethernet ready: Tested to support 1000BASE-T Gigabit Ethernet and high-bandwidth data applications without bottlenecks
- Internal spine separator - reduced crosstalk: Low-Density Polyethylene separator isolates all four twisted pairs, minimising near-end crosstalk (NEXT) and electromagnetic interference
- FRPVC outer sheath - 75 degrees C rated: Fire retardant, self-extinguishing jacket protects against physical damage and limits fire spread along cable runs
- Triple certified - ANSI/TIA-568C.2, ETL, UL: Meets globally recognised CAT 6 structured cabling standards - verified by independent certification bodies
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Brand | Finolex |
| Type | Unshielded Twisted Pair (UTP) CAT 6 |
| Length | 100 Metres |
| Conductor Material | 23 AWG Annealed Bare Solid Copper |
| Insulation Material | High-Density Polyethylene |
| Separator | Low-Density Polyethylene |
| Outer Sheath | Fire Retardant PVC Compound (FRPVC) |
| Temperature Rating | 75 degrees C |
| Impedance (at 250 MHz) | 100 plus or minus 15 Ohms |
| DC Resistance | 9.38 Ohms / 100m at 20 degrees C max |
| Velocity of Propagation (NVP) | 62.10% min at 250 MHz |
| Delay Skew | 45 ns / 100m at 20 degrees C max (1 MHz to 250 MHz) |
| Certifications | ANSI/TIA-568C.2, ETL Verified, UL Listed and Verified for CAT 6 |
| Available Colours | Yellow, Grey |
Installation Guidelines
Step-by-Step Installation
- Cable routing: Avoid sharp bends and kinks. Maintain a minimum bend radius of approximately 4 times the cable diameter to prevent distorting the twisted pairs or breaking internal copper wires.
- Avoid interference sources: Do not run LAN cable parallel to high-voltage power lines, fluorescent lighting, or heavy electrical equipment - this introduces electromagnetic interference (EMI) that degrades signal quality.
- Termination: Use high-quality CAT 6 RJ45 connectors or punch-down keystones. Strip the outer jacket carefully and untwist each pair no more than half an inch - excessive untwisting degrades crosstalk performance at the termination point.
- Testing: After crimping or punching down, use a network cable tester to verify pin-to-pin continuity and confirm there are no shorts, opens, or crossed wires before connecting devices.
Recommended Applications
Where Finolex CAT 6 LAN Cable fits best
- Corporate IT and offices: Structured cabling for servers, workstations, VoIP phones, and network switches in high-density rack environments
- Smart homes and gaming: Wired internet to smart TVs, gaming consoles, Wi-Fi access points, and NAS devices for stable, low-latency connectivity
- IP CCTV and surveillance: Reliable data transmission for IP cameras with PoE (Power over Ethernet) support - delivers both data and power over a single cable run
- Data centres: High-bandwidth backbone cabling for server-to-switch and patch panel connections requiring certified CAT 6 performance
Why Buy from HomeRun?
- Authentic Finolex Product: Verified genuine cable - ETL and UL certified CAT 6 performance, not CCA substitutes sold as solid copper
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal when your network installer is on-site and needs cable immediately
- Project-Friendly Availability: 100-metre coils for single runs or bulk orders for full office and building structured cabling projects
FAQs
1) What is the difference between solid copper and CCA (Copper Clad Aluminium) CAT 6 cable - and why does it matter?
CCA cable uses an aluminium core coated with a thin layer of copper - it looks identical to solid copper cable from the outside but has significantly higher electrical resistance and poorer signal performance, particularly over longer runs. Solid copper cable like this Finolex CAT 6 has lower DC resistance (9.38 Ohms per 100m), better signal integrity at full Gigabit speeds, and longer service life. CCA cable is also not compatible with PoE (Power over Ethernet) applications - the higher resistance causes voltage drop and overheating. Always verify "solid copper" or "bare copper conductor" when purchasing structured cabling for permanent installations.
2) What is the maximum cable run length for Gigabit Ethernet using this cable?
The standard maximum cable run for Gigabit Ethernet (1000BASE-T) on CAT 6 UTP is 100 metres per segment - from the network switch or patch panel to the end device. This 100-metre box covers one complete maximum-length run. For longer distances, a network switch or media converter must be used to extend the run. In practice, most residential and office runs are well within this limit - the 100-metre coil is sufficient for most structured cabling projects in a single floor or apartment.
3) Is this cable suitable for PoE (Power over Ethernet) applications like IP cameras?
Yes - solid copper CAT 6 cable is the correct choice for PoE. PoE delivers both data and electrical power over the same cable. CCA cables are not suitable for PoE because their higher resistance causes voltage drop and heat buildup in the cable, which can damage both the cable and connected devices over time. This Finolex solid copper CAT 6 cable handles PoE safely and reliably for IP cameras, Wi-Fi access points, VoIP phones, and other PoE-powered devices.
4) What certifications does this cable carry and why do they matter?
This cable is certified to ANSI/TIA-568C.2 (the industry standard for CAT 6 structured cabling performance) and verified by both ETL and UL - two internationally recognised independent testing laboratories. These certifications confirm the cable has been independently tested and verified to meet CAT 6 electrical performance requirements - not just self-declared by the manufacturer. For permanent structured cabling in offices, data centres, and commercial buildings, certified cable is typically required for compliance and warranty purposes.
5) Can I use CAT 6 cable for CAT 5e installations, and is it backward compatible?
Yes - CAT 6 is fully backward compatible with CAT 5e equipment. You can use this CAT 6 cable with CAT 5e switches, routers, and patch panels without any issues - it will operate at CAT 5e performance levels in that setup. Using CAT 6 in a CAT 5e installation is common practice for future-proofing - if you upgrade to Gigabit or faster switching equipment later, the cable is already rated for the higher performance without needing to be replaced.
Returns & Exchange Policy
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
- चयन चुनने पर पूरा पृष्ठ रीफ़्रेश हो जाता है.
- एक नई विंडो में खुलता है।
