0 items
Rs. 0.00
Free Delivery
above ₹1000
Pay on Delivery
CP Plus 32 Channel NVR
CP Plus 32 Channel NVRस्टॉक में
नियमित रूप से मूल्य
Rs. 15,499.00
नियमित रूप से मूल्य
Rs. 21,000.00
विक्रय कीमत
Rs. 15,499.00
यूनिट मूल्य
₹0.0/
Incl GST
शिपिंग की गणना चेकआउट पर की जाएगी।
पिकअप उपलब्धता लोड नहीं की जा सकी
Product Highlights
- Manufacturer: CP Plus
- Model: CP-UNR-4K4322-V2 (32 Channel 4K NVR)
- Channel Support: Up to 32 IP cameras, up to 8MP each
- Video Output: Up to 4K HDMI + simultaneous VGA
- Compression: Smart H.265+, H.265, Smart H.264+, H.264 (dual-codec)
- Storage: 2 × SATA HDD bays, up to 10TB each (20TB total)
- USB Ports: 2 ports (1 × USB 3.0, 1 × USB 2.0)
- Warranty: 2 Years standard CP Plus warranty
Product Description
CP Plus 32 Channel 4K NVR (CP-UNR-4K4322-V2) is built for large commercial and multi-floor surveillance sites, letting you manage up to 32 IP cameras from a single unit. It's well suited for factories, warehouses, malls, multi-branch offices, and gated communities that need wide camera coverage from one central recorder.
The NVR runs Smart H.265+/H.265/Smart H.264+/H.264 dual-codec decoding to cut bandwidth and storage needs versus older H.264-only recorders, and delivers up to 200 Mbps incoming bandwidth — enough headroom to run 32 channels at reasonably high resolutions and frame rates at once. Dual SATA HDD bays (up to 10TB each, 20TB total) add redundancy and longer retention compared to single-HDD NVRs, while ONVIF compatibility keeps you free to mix in third-party cameras alongside CP Plus ones.
Key Features
- 32-Channel IP Support: Manage up to 32 IP cameras from a single unit — well-suited for large commercial sites, factories, multi-floor buildings, and gated communities.
- Smart H.265+ Compression: Dual-codec decoding significantly reduces bandwidth consumption and storage requirements compared to older H.264-only recorders.
- Up to 8MP Camera Input: Supports high-resolution IP cameras up to 8MP for clear, detailed preview and playback.
- High Incoming Bandwidth: Up to 200 Mbps incoming bandwidth, giving enough headroom to run 32 channels simultaneously at reasonable resolutions/frame rates.
- Dual SATA HDD Bays: Two SATA HDD slots (up to 10TB each = 20TB total) for redundancy and longer recording retention.
- 4K HDMI + VGA Simultaneous Output: Outputs up to 4K via HDMI, with VGA running alongside for flexible display setups.
- Fast USB Backup: 2 USB ports, including 1 USB 3.0 port, for significantly faster video export/backup than USB 2.0-only models.
- Multi-Brand Camera Compatibility: Works with multi-brand network cameras via ONVIF, so you're not locked into CP Plus cameras alone.
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Model Number | CP-UNR-4K4322-V2 |
| Channels | 32 Channel IP Camera Input |
| Video Compression | Smart H.265+, H.265, Smart H.264+, H.264 (dual codec decoding) |
| Max Camera Resolution | Up to 8MP |
| Video Output | 1 HDMI (up to 4K), 1 VGA (simultaneous output) |
| Max Incoming Bandwidth | Up to 200 Mbps |
| Storage | 2 × SATA HDD bays, up to 10TB each (20TB total) |
| USB Ports | 2 USB Ports (1 × USB 3.0, 1 × USB 2.0) |
| Network Port | Gigabit Ethernet (RJ-45) |
| Camera Compatibility | Multi-brand network cameras (ONVIF compliant) |
| AI Features* | Face detection, perimeter protection, IVS, people counting, heat map, Smart Motion Detection (SMD) — varies by exact firmware/AI camera support |
| Mobile App | iCMOB / gCMOB |
| CMS Software | KVMS Pro |
| Recording Modes | Manual, Scheduled, Motion-based, Event-based |
| Playback | Multi-channel synchronous playback |
| Operating System | Embedded Linux |
| Warranty | 2 Years (standard CP Plus warranty; verify with seller for exact coverage) |
Note: AI feature availability (face recognition, people counting, heat map, etc.) is often tied to using compatible CP Plus AI cameras and specific firmware versions — confirm the exact AI feature set on your unit's datasheet, as this can vary slightly between V2/V3/V4 revisions of this NVR family.
Recommendations & Use Cases
This NVR is best suited for medium-to-large commercial installations and control rooms that need 20+ camera coverage with room to scale up over time.
Where this product fits best
- Large Commercial Installations: Factories, warehouses, malls, multi-branch offices, and large residential complexes needing 20+ camera coverage.
- Future-Proofing: 32 channels gives room to add more cameras later without upgrading the NVR.
- Extended Storage Retention: Dual HDD bays (up to 20TB) support weeks/months of continuous recording depending on resolution and camera count.
- Security Command Centers: Control rooms needing centralized monitoring via KVMS Pro software across many camera feeds.
Pairing Suggestions
Get the most out of this NVR
- Cameras: Use with CP Plus 4MP/5MP/8MP IP cameras to make full use of the 8MP resolution support.
- PoE Switch: Pair with a managed PoE switch (16/24-port) since 32 channels will typically need multiple switches or a high-port-count PoE switch for cabling.
- Hard Disks: Choose 2 × surveillance-grade HDDs (e.g., WD Purple, Seagate SkyHawk) rather than desktop-grade drives, since this NVR will likely run 24×7 with heavy write loads across 32 channels.
- AI Verification: If you need AI-based face recognition or people counting reliably, verify with the seller whether your specific unit revision (V2 vs V3 vs V4) supports these NVR-side or only camera-side, as capabilities differ across revisions.
Points to Note Before Buying
- Revision Differences: This is the V2 revision — CP Plus also sells V3 and V4 versions of this NVR series with minor differences in AI features and decoding capability. Cross-check the datasheet if specific AI analytics (e.g., stereo analysis, SMD Plus) are a hard requirement, as these are more consistently available on later revisions.
- HDDs Not Included: Budget separately for 1 or 2 surveillance HDDs.
- Bandwidth Monitoring: With 32 channels active, monitor your bandwidth usage against the 200 Mbps incoming cap, especially if running higher-resolution cameras across all channels.
Why Buy from HomeRun?
- Genuine CP Plus Hardware: Verified authentic units directly backed by full manufacturer warranty.
- 60-Minute Bangalore Delivery: Express fulfillment directly to your current project site when time is tight.
- Project-Friendly Pricing: Transparent wholesale structures optimized for surveillance installers and large-scale projects alike.
FAQs
1) Can I really run all 32 cameras at their maximum 8MP resolution simultaneously?
Not necessarily. While the NVR technically supports 8MP camera input, the total incoming bandwidth is capped at 200 Mbps. Running 32 cameras all at 8MP would exceed this bandwidth limit. In practice, you'd typically run a mix of resolutions (e.g., a few at 8MP for critical areas, others at 2MP/4MP) to stay within bandwidth while covering all channels.
2) Does this NVR come with hard disks included, and what's the maximum storage I can add?
No, hard disks are sold separately. This model supports 2 SATA HDD bays, each accepting drives up to 10TB, giving a maximum of 20TB total storage. We recommend surveillance-rated drives (WD Purple, Seagate SkyHawk, etc.) designed for continuous read/write cycles, rather than standard desktop HDDs.
3) Is this NVR compatible with cameras from other brands, or only CP Plus cameras?
Yes, it supports multi-brand network cameras through ONVIF compatibility. This means many third-party IP cameras that follow the ONVIF standard can be integrated. However, some advanced AI features (like face recognition or SMD Plus) may only be fully functional when paired with CP Plus's own AI-enabled cameras.
4) Can I access this NVR remotely from my phone, and is there a limit on how many people can view it simultaneously?
Yes, remote access is available through CP Plus's iCMOB (iOS) and gCMOB (Android) mobile apps, plus KVMS Pro software for desktop/centralized monitoring. For exact concurrent remote-user limits, it's best to check the current user manual/datasheet, as this can vary by firmware version.
5) What's the difference between the USB ports, and why does it matter?
This NVR has 2 USB ports — one USB 3.0 and one USB 2.0. The USB 3.0 port is significantly faster for backing up large volumes of recorded footage (e.g., exporting several days of 32-channel HD footage), while the USB 2.0 port is typically used for connecting a mouse for local NVR navigation. Always use the USB 3.0 port for large backup transfers to save time.
Returns & Exchange Policy
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
- चयन चुनने पर पूरा पृष्ठ रीफ़्रेश हो जाता है.
- एक नई विंडो में खुलता है।
