





Jaquar Aquamax Single Lever Shower Mixer Exposed Kit, 3-Way Diverter, Chrome Finish - KUP-CHR-35783NKPM
- Please note: This is the exposed part kit only — it requires concealed body ALD-783N, sold separately
- Manufacturer: Jaquar & Company Private Limited
- Code: KUP-CHR-35783NKPM · Range: Kubix Prime
- Product Family: Aquamax single lever shower mixer
- Diverter: 3-way — feeds three shower outlets from one control
- Operation: Single lever — temperature and flow from one handle
- Finish: Chrome
- Fitted: Over a concealed body already built into the wall
Downloads — Data Sheet, Installation Guide & Drawing
- Data Sheet: Download the PDF
- Installation Guide: Download the PDF
- 2D Technical Drawing: Download the PDF
- Give the installation guide to your plumber before first fix. On a concealed system the position and depth of the concealed body decide everything, and neither can be adjusted once the wall is tiled
Jaquar Aquamax Exposed Part Kit (KUP-CHR-35783NKPM) is the visible half of a concealed shower mixer in the Kubix Prime range — the plate, lever and diverter control that sit on your tiled wall, with a 3-way diverter.
The 3-way diverter is the reason to specify this rather than a plain shower mixer. It lets one control feed three separate outlets — typically an overhead rain shower, a hand shower, and a bath spout or body jets. You turn the water on with the lever and choose where it goes with the diverter, from a single tidy plate rather than a wall covered in separate valves.
The single lever handles temperature and flow together: lift for volume, swing left or right for hotter or colder. It is the action most people already use at a basin, so nobody has to learn the shower.
It is worth being direct about what is in the box. Jaquar designs concealed mixers as two separate purchases: the concealed body, which is the working valve and is built into the wall, and the exposed part kit, which is what you see and touch. This listing is the exposed kit. It fits over concealed body ALD-783N, which is sold separately and must be in the wall before tiling.
That split exists for a good reason. It means the visible trim can be changed or upgraded years later without touching the plumbing, and it lets one concealed body serve several styling ranges. It only becomes a problem when a customer buys one half expecting a whole shower.
Important — This Is Half of a System
- You also need concealed body ALD-783N. It is a separate purchase, it is the part that actually mixes and diverts the water, and without it this kit does nothing
- The concealed body goes in before tiling. It is fitted during first-fix plumbing and built into the wall. If it is missing or wrong, correcting it means breaking tiles
- Match the body exactly. Jaquar specifies ALD-783N for this kit. Other ALD bodies look similar and are not interchangeable — the thermostatic Aquamax kits, for example, use ALD-683N
- Plan the three outlets first. A 3-way diverter is only useful if three outlets are actually plumbed — decide on overhead shower, hand shower and spout before first fix
- Check the plate size against the wall opening using the 2D drawing, so the finished plate covers the recess cleanly
- Tell us what you already have and we will confirm the pairing before you order
Key Features
- 3-way diverter: One control feeds three outlets — overhead shower, hand shower and spout or body jets
- Single lever operation: Temperature and flow from one handle, the action people already know
- Concealed installation: Only a slim plate and lever on the wall — all the plumbing is hidden
- Serviceable after tiling: The exposed kit removes to reach the cartridge inside the wall
- Upgradeable trim: The visible parts can be changed years later without touching the plumbing
- Kubix Prime styling: Squared geometry matching Kubix Prime taps, valves and accessories
- Chrome finish — one of ten finishes Jaquar offers across this range
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Code | KUP-CHR-35783NKPM |
| Range | Kubix Prime |
| Product Family | Aquamax single lever shower mixer |
| Part Type | Exposed part kit only |
| Required Concealed Body | ALD-783N — sold separately |
| Diverter | 3-way |
| Operation | Single lever |
| Thermostatic | No – Single Lever |
| Finish | Chrome |
| Working Pressure | 0.2–5 bar |
| Plate Dimensions | 105 × 275 mm |
Recommended Applications
Where this fits best
- New bathrooms and full renovations: Where the concealed body can be planned into first-fix plumbing
- Showers with three outlets: Overhead rain shower, hand shower, and a bath spout or body jets
- Kubix Prime bathrooms: Matching the taps, angle valves and accessories in that range
- Minimal, uncluttered designs: One plate on the wall instead of several separate valves
- Replacing worn trim: Where an ALD-783N body is already in the wall and only the visible parts need renewing
1) Is this a complete shower mixer?
No — and this is the most important thing to know before ordering. This is the exposed part kit only: the plate, lever and diverter control you see on the wall. The working valve is the concealed body ALD-783N, which is a separate purchase and is built into the wall before tiling. Neither half works without the other.
2) What does a 3-way diverter do?
It lets one control feed three separate outlets — typically an overhead rain shower, a hand shower, and a bath spout or body jets. You set the water with the lever and choose where it goes with the diverter, from one plate instead of several valves on the wall.
3) Which concealed body do I need?
ALD-783N. Jaquar specifies it for this kit. Other ALD bodies look similar and are not interchangeable — the Aquamax thermostatic kits, for instance, use ALD-683N. Tell us what is in your wall, or what your plumber has specified, and we will confirm the pairing before you order.
4) Can it be serviced once the wall is tiled?
Yes — that is the point of the two-part design. The exposed kit removes to give access to the cartridge inside the wall, so a worn cartridge is replaced without disturbing any tiling. It also means you can change the visible trim years later without touching the plumbing.
5) What else do I need to plan before installation?
Three things, all before first fix. The concealed body must be ordered and fitted at the right depth and position; the three outlets must actually be plumbed, or a 3-way diverter has nothing to divert to; and the plate size should be checked against the wall opening using the 2D drawing. Give your plumber the installation guide linked above before any work starts.
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
This is an exposed part kit for a concealed system. Please confirm you have the matching ALD-783N concealed body before your plumber begins — once a concealed body is built into a wall and tiled over, changing it is a major job.
You may also like






