Taparia PVC Insulation Tape - Black | 17MM - IT17B

• Manufacturer: Taparia Tools Ltd.
• Model: IT17B
• Product: PVC Insulation Tape — Black, 17 mm
• Width: 17 mm
• Colour: Black
• Material: PVC with pressure-sensitive adhesive
• Use: Insulating and bundling electrical joints and wiring
• Properties: Flexible, stretchable, conformable around irregular shapes

Taparia PVC Insulation Tape IT17B is 17 mm black electrical tape — the consumable every electrical job goes through.

PVC is used rather than cloth or paper because it does three things at once: it insulates electrically, resists moisture, and stretches. That stretch is what makes it work on a real joint — the tape conforms tightly around irregular shapes, bends and joins without leaving air gaps, and the tension holds it in place.

Black is the standard general-purpose colour. Coloured insulation tape exists for phase identification, but black is what most joints get wrapped in.

Worth being clear about scope: insulation tape is for insulating and protecting a properly made joint. It is not a way to join conductors, not a repair for damaged cable insulation on a live circuit, and not a substitute for a proper connector or junction box.

Technical Specifications

1) What is insulation tape actually for?

Insulating and protecting a joint that has already been properly made — and bundling or identifying cable. It is not a way to join conductors together.

2) Can I join two wires with just tape?

No, and this is worth being firm about. Conductors must be mechanically and electrically connected first with a connector, crimp or terminal. Tape over twisted wires is not a connection — it works loose, heats up and is a genuine fire risk.

3) How should I wrap it?

Stretch it slightly as you go and overlap each turn by about half the tape width. Start and finish on sound insulation rather than bare conductor, and carry the wrap well past the joint at both ends.

4) Can I use it to repair damaged cable?

Not as a permanent fix. Isolate the circuit first, then replace the cable or make a proper repair in an enclosure. Tape over damaged insulation hides a fault rather than fixing it.

5) Does the colour mean anything?

It can. Coloured insulation tape is used for phase identification in some installations. Black is the standard general-purpose colour for ordinary insulating and bundling work.

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details