Taparia Nipper - 125MM - NP 05

Name: Taparia Nipper - 125MM - NP 05
Brand: HomeRun
SKU: MXR2S
Price: 102.0 INR
Availability: InStock

₹104

₹102

5%FLAT

Cashbackon 1 Lakh+ orders

Incl GST Shipping calculated at checkout.

Manufacturer: Taparia Tools Ltd.
Model: NP 05
Product: Nipper — 125 mm
Length: 125 mm
Type: End cutting nipper / pincer
Cutting Edge: At the end of the jaws, not the side
Use: Cutting wire and nails flush to a surface, pulling nails and tacks

Taparia Nipper NP 05 is a 125 mm end cutting nipper — the cutting edges are at the end of the jaws rather than the side, and that single difference is the whole tool.

Because the edges face forward, a nipper can be laid flat against a surface and cut something off flush with it. A side cutter physically cannot do that — its body gets in the way, so it always leaves a projecting stub. For cutting a nail or wire flush with timber, snipping a projecting fixing, or trimming a tie flush, a nipper is the only tool that works.

The same jaw geometry makes it good at pulling. Grip a nail head or tack close to the surface and roll the tool back on its jaws, and the curved profile levers the fixing out.

Key Features

End cutting edges: Sits flat on a surface and cuts flush — a side cutter cannot
Doubles as a puller: Grip a nail head and roll back to lever out tacks and fixings
125 mm: Compact enough for a pouch, with enough leverage for wire and small nails
Forged and heat treated for edge durability
Made by Taparia Tools — an ISO-9001 company manufacturing hand tools in India since 1969, in technical collaboration with Bahco of Sweden

Technical Specifications

Technical Specifications (Quick Reference)

Specification	Details
Model	NP 05
Type	End cutting nipper / pincer
Length	125 mm
Cutting Edge Position	End of jaws

Before You Use It

Insulated sleeves are for grip and comfort, not electrical protection. Unless VDE certified to 1000 V, do not use on live circuits
Do not use pliers as a spanner. They grip on two points and round nuts — that is what spanners are for
Do not extend the handles for more leverage; it springs the joint and ruins the tool
Keep it dry and lightly oiled — hand tools rust quickly through a Bengaluru monsoon
Use the tool for its intended job; most hand tool failures come from using one as a pry bar

1) How is a nipper different from a side cutter?

The cutting edges are at the end of the jaws, not the side. That means it can lie flat against a surface and cut flush with it. A side cutter’s body gets in the way and always leaves a projecting stub.

2) What is it best at?

Cutting nails and wire flush to a surface, and pulling tacks and small nails. Grip the head close to the surface and roll the tool back on its jaws — the curved profile levers the fixing out.

3) Can I cut hardened steel or nails with it?

Soft nails and wire, yes. Hardened steel will notch the edges, and once notched a nipper never cuts cleanly again. Check the rated cutting capacity in the catalogue linked above.

4) Can I use it on live electrical work?

No. Any insulated sleeves are for grip and comfort, not electrical protection. Use VDE-certified tools tested to 1000 V for live work.

5) Why do my cutting edges keep chipping?

Almost always cutting material harder than the tool is rated for, or twisting the tool while cutting. Cut squarely, stay within the rated capacity, and never use the jaws to twist or pry.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once installed or used
Refer to Refund Policy for complete details

taparia nipper np 05 125mm end cutting pincer flush cut nail puller wire cutting hand tool bangalore