Futura Hand Carved Series Single Bowl, Stainless Steel

Product Highlights

• Manufacturer: Futura
• Model: Hand Carved Series Single Bowl Kitchen Sink
• Available Models: FS 1412 HM and FS 2418 HM
• Configuration: Single Bowl - Hand Carved (manually fabricated)
• Material: High Grade Stainless Steel 304 (18/8)
• Finish: Brush Finish (both models)
• Mounting Options: Under-mount (primary), Top Mount
• Sound Dampening: Advanced underside sound-dampening pads
• Included: High-flow drainer waste coupling and heavy-duty mounting clips
• Warranty: Futura manufacturer quality assurance

Product Description

Futura Hand Carved Series Single Bowl Sink is a professionally fabricated kitchen sink range available in two models - FS 1412 HM (14" x 12" overall, 7-inch deep bowl) and FS 2418 HM (24" x 18" overall, 9-inch deep bowl) - both manufactured from thick-gauge High Grade SS 304 (18/8) using a hand-fabrication process rather than the machine-pressing method used in standard economy sinks. In a machine-pressed sink, a single flat sheet of steel is stamped under high pressure into the basin shape - this stretches and thins the metal at the corners and walls, producing rounded, sloping internal sides with limited flat base area. In the Hand Carved construction, flat sheets of thick-gauge SS 304 are cut and welded together with precision, producing sharp vertical sidewalls and tight-radius corners that maximise every millimetre of internal basin volume - delivering significantly more usable flat base area and internal capacity than a pressed sink of equivalent overall dimensions.

The FS 1412 HM at 14" x 12" is the compact specialist - suited to kitchen island prep zones, wet bars, and secondary utility sinks where a premium single-bowl with a full 7-inch depth is needed in a small footprint. The FS 2418 HM at 24" x 18" with a 9-inch deep bowl is the primary washing station specification - the basin depth hides a full stack of dishes below the counter sightline and handles large biryani pots, pressure cookers, and kadhais under high-flow faucet pressure without splash-back. Both models are finished in a premium brush finish - a sophisticated matte surface texture that resists fingerprints and effectively masks minor scratches through daily use. Advanced sound-dampening pads on the underside absorb vibration from running water and metal utensil contact, reducing operational noise in open-plan kitchen environments.

Technical Specifications

Model Selection Guide

Installation Guidelines

Recommended Applications

Why Buy from HomeRun?

FAQs

1) What makes a Hand Carved sink different from a standard pressed sink?

In a standard machine-pressed sink, a single flat sheet of steel is stamped under high pressure into the basin shape - this process stretches and thins the metal at the corners and walls, producing gently sloping rounded sides and limited flat base area. In a Hand Carved sink, flat sheets of thick-gauge SS 304 are cut to precise dimensions and welded together - the metal is never thinned or stretched, and the result is sharp vertical sidewalls, tight-radius corners, and a larger flat base area inside the basin. This translates to more usable internal volume per square inch of counter space, a sharper modern aesthetic, and a more rigid, dent-resistant construction than pressed sinks of equivalent overall dimensions.

2) Which model should I choose - FS 1412 HM or FS 2418 HM?

Choose the FS 1412 HM (14" x 12", 7-inch depth) for secondary applications - kitchen island prep zones, wet bars, studio apartment kitchens, and utility sinks where counter space is limited and a compact premium single-bowl is required. Choose the FS 2418 HM (24" x 18", 9-inch depth) for the primary washing station in a large family kitchen where the deepest available basin, maximum washing area, and heavy Indian cookware management are the daily requirements. The FS 2418 HM's 9-inch depth is specifically designed to eliminate splash-back when washing large pressure cookers and kadhais under high-flow faucets.

3) Are the tight corners of a Hand Carved sink harder to clean?

No - while the internal corners are tighter and more vertical than a pressed sink, they are designed with a subtle radius that allows a sponge or cloth to reach and clean every corner without leaving blind spots where grease or food residue can accumulate. The near-vertical walls also mean that food particles and water flow straight to the drain outlet rather than pooling in curved corners as they do in round-bowl pressed sinks - making the Hand Carved basin easier to rinse clean with a quick splash of water after use.

4) Can a water purifier tap or additional faucet be installed on this sink?

Yes - for top-mount installation, an additional tap hole can be drilled in the sink deck area (the flat rim surrounding the bowl) by a plumber or fabricator before installation. For under-mount installation, the additional tap is typically drilled directly into the stone countertop adjacent to the sink, which gives a cleaner appearance than drilling through the sink deck. Confirm the desired tap hole position with your plumber and kitchen installer before the countertop is cut and sealed - adding tap holes after installation is more complex.

5) Will the brush finish rust or stain in a hard water or coastal environment?

The SS 304 (18/8) alloy is highly resistant to rust and oxidation in hard water and coastal salt-air environments - the 18% chromium content forms a passive protective layer that resists corrosion under normal kitchen conditions. The brush finish, unlike a mirror-polished surface, effectively masks minor surface marks and water spot deposits. The most common cause of rust marks on stainless kitchen sinks is leaving iron-containing items (cast iron cookware, steel wool, metal clips) in direct, prolonged contact with the wet sink surface - rinsing and wiping the sink dry after use eliminates the majority of staining and keeps the brush finish in consistent condition long-term.

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details