Diversey TASKI R3 Professional Glass & Mirror Cleaner Concentrate 5L | Streak-Free Housekeeping

• Brand: TASKI (by Diversey)
• Product: R3 Glass and Mirror Cleaner Concentrate
• Active Cleaning Engine: Neutral, rapid-drying surfactant blend
• Finish: Streak-free, quick-drying finish in a single pass
• Standard SOP Dilution: 20 ml per 1 Litre of water (2%) for daily glazing; up to 50 ml per 1 Litre (5%) for heavy soiling
• Application: Spray onto a clean, lint-free cloth or directly onto the glass; wipe dry immediately for a streak-free finish

TASKI R3 is the glass and mirror cleaner concentrate in the TASKI range, engineered to leave reflective surfaces clear and completely streak-free in a single pass. Streaking is almost always caused by a slow-drying formula that is still wet when the wipe finishes, so the residue left behind dries into the smear you were trying to remove. R3 is built with a fast-evaporating surfactant system so the wipe finishes at the same pace the liquid does.

It targets oily soils and finger marks specifically — the marks that actually show up on glass in a working building, from door panels and partitions to mirrors and lobby glazing. Because it is formulated to a neutral pH (6.5 – 7.5) rather than an acidic or alkaline one, it cleans without etching or dulling adjacent brass, chrome, or anodised aluminium frames around structural glazing.

As a concentrate, one 5 litre pack goes a long way: at the standard 20 ml/litre daily-glazing dilution it stretches to around 250 litres of ready-to-use solution. The one requirement is that whoever mixes it follows the label — too strong leaves a residue that streaks, too weak will not cut oily marks. As a neutral formula, R3 should also never be mixed with other TASKI concentrates; blending it with an alkaline cleaner like R1 or R2, or an acidic one like R6, disturbs its neutral chemistry and breaks down the fast-drying action that keeps it streak-free.

Technical Specifications

The TASKI R-Number System

Safety and Handling — Please Read

Why Buy from HomeRun?

1) Why does my glass still streak after using TASKI R3?

Usually too strong a mix, too much product, or a dirty cloth. A light, even application with a clean lint-free cloth beats a soaked surface every time. Cleaning glass in direct sunlight also causes streaks, because the solution dries before you can wipe it away.

2) What is the correct dilution ratio for everyday cleaning versus heavy soiling?

For daily glazing, dilute 20 ml of concentrate per 1 litre of water. For heavier oily soiling or grease, this can be increased up to 50 ml per 1 litre of water.

3) Can I use it on mirrors and electronic screens?

It is made for glass, mirrors, and reflective surfaces. For coated electronic display screens or anti-glare panels, check the device manufacturer's guidance first — most screen coatings should only be cleaned with water and a microfibre cloth.

4) Is TASKI R3 safe around metal window frames and fittings?

Yes. Its neutral pH (6.5 – 7.5) is formulated not to etch or dull adjacent brass, chrome, or anodised aluminium frames around structural glazing.

5) Can I mix R3 with other TASKI cleaners for a stronger result?

No. R3's neutral chemistry is what gives it its fast-drying, streak-free action. Mixing it with an alkaline cleaner like R1 or R2, or an acidic one like R6, disturbs that balance and can leave streaks or residue. Never combine any restroom or surface chemicals from different pH categories.

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once opened or used
3. Refer to Refund Policy for complete details