Taparia C-Clamp - 2 Inch - 1259 2"

• Manufacturer: Taparia Tools Ltd.
• Model: 1259-2
• Product: C-Clamp — 2 Inch
• Jaw Opening: 2 inch
• Type: G-clamp / C-clamp, screw operated
• Use: Holding work to a bench, clamping glue joints, temporary fixing
• Body: Forged frame with a swivel pad on the screw

Taparia C-Clamp 1259-2 is a 2-inch screw clamp — the simplest and most dependable way to hold a workpiece still.

Its value is disproportionate to its price, because a clamped workpiece is a safe workpiece. Holding material by hand while you cut, drill or grind it is how most workshop injuries begin: the work shifts, the tool catches, and your hand is right next to it. A clamp removes that entirely and frees both hands for the tool.

The swivel pad on the end of the screw is the detail worth noticing. It stays flat against the work as the screw turns, so it grips without scuffing or twisting the surface — important on finished timber or anything you are gluing, where a rotating pad would mark it.

Technical Specifications

1) What is a C-clamp actually for?

Holding work still. In practice that means freeing both hands for the tool, which is the single biggest safety improvement in most workshop tasks — holding material by hand while cutting or drilling is how most injuries start.

2) What does the swivel pad do?

It stays flat against the work as the screw turns, so it grips without scuffing or twisting the surface. On finished timber or a glue joint, a rotating pad would mark and shift the work.

3) How tight should I tighten it?

Hand tight only. Never extend the handle with a bar for extra leverage — over-tightening bends the frame and can crack a casting, and the extra pressure achieves nothing useful.

4) Will it mark my workpiece?

It can on soft or finished material. Put scrap packing between the clamp and the work — a piece of ply or hardboard is enough to spread the pressure and protect the surface.

5) What size work will a 2-inch clamp hold?

Material up to 2 inches thick, including any packing you put between the clamp and the work. Measure before ordering, and remember packing eats into the opening.

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details