



Taparia Combination Spanner
- Manufacturer: Taparia Tools Ltd.
- Model: CS series
- Product: Combination Spanner
- Sizes Available: 10 mm, 13 mm, 17 mm, 19 mm
- Type: Combination — open jaw at one end, ring at the other
- Material: Chrome vanadium steel
- Finish: Chrome plated
- Both ends the same size on each spanner
Taparia Combination Spanner has an open jaw at one end and a ring at the other, both the same size — available here in 10, 13, 17 and 19 mm.
The two ends are not redundant; they do different jobs and you use both on the same fastener. The ring end grips all six faces of a nut, which spreads the load and is what you use to break a tight fastener loose or do the final tightening — it will not round the corners. The open end grips only two faces and is therefore weaker, but it slides on sideways, which is the only way onto a nut on a pipe or in a confined space.
The working method follows: crack it loose with the ring, spin it off with the open end, then tighten with the ring again. Using the open end to break a seized nut is how nuts get rounded.
Key Features
- Ring end grips all six faces: Spreads load, will not round the nut — use it to loosen and finally tighten
- Open end slides on sideways: The only way onto a nut on a pipe or in a tight space
- Same size both ends: One tool per fastener size, no juggling
- Four common sizes: 10, 13, 17 and 19 mm cover most everyday fasteners
- Chrome plated for corrosion resistance and easy cleaning
- Made by Taparia Tools — an ISO-9001 company manufacturing hand tools in India since 1969, in technical collaboration with Bahco of Sweden
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Range | Taparia CS combination spanners |
| Type | Combination — open jaw and ring |
| Sizes Available | 10 mm, 13 mm, 17 mm, 19 mm |
| Material | Chrome vanadium steel |
| Finish | Chrome plated |
Using Spanners Properly
- Break tight fasteners with the ring end, not the open end. The open end grips only two faces and will round the corners of a seized nut
- Never extend the handle with a pipe. A spanner is designed for hand force; a cheater bar can spring the jaw or snap the tool
- Pull, do not push, where you can — if the fastener releases suddenly, pulling keeps your knuckles away from what is behind it
- Check the size fits snugly. A spanner that is even slightly oversize, or an imperial spanner on a metric nut, will round the fastener
- Keep it dry and lightly oiled — hand tools rust quickly through a Bengaluru monsoon
- Use the tool for its intended job; most hand tool failures come from using one as a pry bar or chisel
1) Why does a combination spanner have two different ends?
They do different jobs. The ring end grips all six faces and will not round a nut — use it to loosen and finally tighten. The open end grips two faces but slides on sideways, which is the only way onto a nut on a pipe or in a tight space.
2) Which end should I use to loosen a tight nut?
The ring end, always. It spreads load across all six faces. Using the open end on a seized fastener concentrates force on two corners and rounds them, after which no spanner will grip it.
3) Are both ends the same size?
Yes — on a combination spanner both ends are the same size. That is the point: one tool covers one fastener size completely, with no swapping mid-job.
4) Which sizes should I buy?
10, 13, 17 and 19 mm cover the majority of everyday fasteners in appliances, furniture, plumbing and light automotive work. If you want a full spread, the 8-piece or 12-piece sets are better value than buying singly.
5) Can I put a pipe on the handle for more leverage?
No. A spanner is sized for hand force, and a cheater bar can spring the jaw open or snap the tool — usually with your hand travelling fast in the direction you were pulling.
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like






