Futura PTMT Connection Pipe | Both Side PVC Chuck Nut, 24"

Product Highlights

• Manufacturer: Futura Kitchen Sinks India Pvt. Ltd.
• Model: NW-045B
• Length: 24 inches
• Pipe material: PTMT (Polytetrametaxylene terephthalamide)
• Connectors: PVC chuck nut on both ends
• Category: Connection pipe

Product Description

Futura PTMT Connection Pipe with Both Side PVC Chuck Nut is a 24-inch flexible connector for linking a wall inlet or angle valve to a tap. PTMT is a corrosion-free engineering polymer widely used across Indian plumbing fittings — it doesn't rust, doesn't react with water, and won't develop the scale or green staining that untreated metal fittings can pick up over time.

Both ends carry a PVC chuck nut, so the pipe connects and disconnects by hand without special tooling — practical for quick tap swaps and routine servicing. At a lower price point than a braided steel hose, this is the standard-duty choice for wash basins, low-pressure taps, and budget-conscious fitouts where a metal-jacketed connector isn't required.

Technical Specifications

Variant Comparison

Recommended Applications

FAQs

1) Should I choose this or the stainless steel braided hose?

This PTMT pipe is the economical standard-duty option for wash basins and normal-pressure taps. The braided steel hose (NW-048 series) resists kinking and burst pressure better and is the stronger choice for high-pressure lines or kitchen mixers.

2) What length options are available?

Futura offers this connection pipe in 18" (NW-045A) and 24" (NW-045B). Measure from your angle valve to the tap inlet and allow a little slack rather than stretching the pipe tight.

3) Do I need tools to install this?

No — the PVC chuck nuts on both ends hand-tighten onto standard threaded inlets. Tighten firmly by hand, then run water and check both joints for seepage before closing the cabinet.

4) Will PTMT corrode or discolour over time?

PTMT is a corrosion-free polymer, so it won't rust or develop the green staining that untreated metal fittings can. Keep it out of direct sustained sunlight where possible, as with any polymer plumbing part.

5) Is this suitable for hot water lines?

PTMT is commonly used across Indian plumbing for both hot and cold applications, but for sustained high-temperature use — such as a direct geyser outlet — a braided stainless steel hose is the more robust choice. Check your fitting's rated temperature before installing.

Returns & Exchange Policy

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details