Ebco Aluminium Profile Shutter Handle End Cap, EC-1935-AB, Anodised Black, L+R Set

Product Highlights

• Manufacturer: Ebco
• Product: Aluminium Profile Shutter Handle End Cap 1935
• Function: Finishing end closure for aluminium profile handles
• End Cap Dimensions: 20 x 35mm
• Compatible Profile: 19 x 35mm aluminium profile handles
• Material: Aluminium
• Finish Options: Multiple finishes available - match to your profile handle
• Packaging: 1 set - Pair of Left and Right end caps (2 pieces per set)
• Application: Kitchen shutters, wardrobe doors, cabinet handles
• Warranty: Ebco manufacturer quality assurance

Product Description

Ebco Aluminium Profile Shutter Handle End Cap 1935 is a finishing accessory for 19 x 35mm aluminium profile handles - the slim, recessed pull handles widely used on kitchen shutter doors, wardrobe panels, and modular cabinet shutters in contemporary Indian interiors. Each set contains a pair of Left and Right end caps - one cap for each end of a single profile handle - providing clean, flush closures that seal the open profile ends, protect the cut edges of the aluminium extrusion, and give the installed handle a fully finished, professional appearance. Without end caps, a cut profile handle has exposed hollow ends that collect dust, show the internal extrusion cavity, and present an unfinished edge that detracts from the quality of an otherwise well-fitted cabinet.

The end caps are precision-manufactured at 20 x 35mm to fit snugly into the 19 x 35mm profile opening - the slight dimensional difference creates a press-fit that seats the cap flush with the profile face without the need for adhesive or fixing screws. Available in multiple finishes to match the aluminium profile handle being used, ensuring the completed handle assembly presents as a single cohesive unit from tip to tip. For modular kitchen and wardrobe installers, these end caps are an essential small-quantity accessory to have on-site at the time of handle installation - fitting them at the end of the installation adds a professional finish to every door in the project.

Technical Specifications

Installation Guidelines

Recommended Applications

Why Buy from HomeRun?

FAQs

1) How many end caps are in a set, and is it enough for one handle?

Each set contains one pair - a Left and a Right end cap - which is exactly the quantity required to complete one profile handle installation (one cap for each end of the same handle). If you are fitting multiple handles, order one set per handle. For a full kitchen fitout with many doors, calculate the total number of handles being fitted and order the corresponding number of sets.

2) What profile size do these end caps fit - will they work with other sizes?

These end caps are specifically dimensioned for 19 x 35mm aluminium profile handles - the 20 x 35mm end cap dimensions create a press-fit into the 19 x 35mm profile opening. They will not fit correctly into profiles of different dimensions - a smaller profile will be too loose and the cap will not stay in place; a larger profile opening will be too wide for the cap to engage. Always confirm your profile handle is 19 x 35mm before ordering this accessory.

3) Are multiple finishes available, and how do I choose the right one?

Yes - end caps are available in multiple finishes to match the most common aluminium profile handle surface treatments. Select the finish that matches your existing profile handle finish exactly - the end cap and handle profile should appear as a single continuous material from end to end. If you are unsure of your handle's finish code, check the handle packaging or confirm with your kitchen hardware supplier before ordering the end cap finish.

4) Can the end cap be removed after installation if I need to cut the profile shorter?

The end cap is designed as a press-fit permanent finish accessory - it is not intended to be repeatedly removed and refitted. If the profile needs to be re-cut after the end cap has been fitted, the end cap will typically be damaged during removal and will need to be replaced with a new set. For this reason, always cut the profile to its final length and verify the dimension before fitting the end caps - do not fit end caps until the profile is confirmed at its correct installed length.

5) Do I need adhesive or any tools to install the end caps?

No - the end caps are press-fit only, requiring no adhesive, screws, or tools. The dimensional fit between the 20 x 35mm cap and the 19 x 35mm profile opening provides the holding friction. Press the cap firmly and evenly into the profile opening with thumb pressure until it seats flush - the installation takes a few seconds per cap. Ensure the profile end is clean and free from burrs before fitting, as debris inside the profile opening can prevent the cap from seating fully flush.

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details