Free Deliveryon orders above ₹500

60 Mins

Pay on Delivery

Gas Cutting Torch l Manual Gas Cutting Blowpipe

Name: Gas Cutting Torch l Manual Gas Cutting Blowpipe
Brand: HomeRun
SKU: W8AHL
Price: 2550.0 INR
Availability: InStock

₹2,550

Instant

Discounton orders above 50K

Incl GST Shipping calculated at checkout.

Type

2-Pipe Injector Mix Style

₹2,550

3-Pipe Nozzle Mix Style

₹3,100

Brand: Generic
Product: Heavy Duty Gas Cutting Torch (Blowpipe)
Variants: 2-Pipe (injector type) / 3-Pipe (nozzle mix type)
Gas: Oxy-acetylene or oxy-LPG / propane
Cutting Capacity: 2-Pipe up to 150 mm; 3-Pipe up to 250 – 300 mm steel (with suitable nozzle)
Length: 2-Pipe approx. 450 mm (18"); 3-Pipe approx. 450 – 500 mm (18" – 20")
Hose Connection: 3/8" BSP threaded inlets
Packaging: 01 Nos (cutting nozzle not included)
Application: Steel fabrication, construction sites, scrap cutting, demolition & maintenance
Please Note: Brand may vary from the images shown, subject to stock availability. Specifications remain the same.

This Heavy Duty Gas Cutting Torch is a manual blowpipe for cutting mild steel plates, beams, channels and girders on fabrication shops, construction sites and scrap yards. Built from forged brass with copper alloy or stainless steel pipes, it is made for tough, everyday site use.

Choose the 2-Pipe injector-type torch for regular workshop cutting up to about 150 mm, or the 3-Pipe nozzle-mix torch for heavy-duty cutting up to about 250 – 300 mm. In the 3-pipe design, oxygen and fuel stay separate until they leave the nozzle, giving much better resistance to backfire. Both work with acetylene or LPG/propane using the correct nozzle, and connect to standard 3/8" BSP hoses.

Key Features

Two Designs: 2-pipe for everyday cutting, 3-pipe for heavy-duty work
Backfire-Resistant 3-Pipe: Gases mix only at the nozzle for safer operation
Heavy Cutting Capacity: Up to 150 mm (2-pipe) or 250 – 300 mm (3-pipe) steel
Colour-Coded Valves: Blue for oxygen, red for fuel; 3-pipe adds a cutting oxygen lever
Standard Fittings: 3/8" BSP inlets fit common twin welding/cutting hoses

Product Specifications Table

Technical Specifications (Quick Reference)

Specification	2-Pipe	3-Pipe
Brand	Generic (subject to stock availability)
Design Type	Injector type – gases mix inside the torch	Nozzle mix (NM) type – gases mix in the nozzle
Gas	Oxy-acetylene or oxy-LPG / propane (with matching nozzle)
Cutting Capacity	Up to 150 mm steel	Up to 250 – 300 mm steel
Construction	Forged brass and copper alloy	Forged brass body, stainless steel pipes
Controls	Dual valves (blue oxygen, red fuel)	Dual valves + cutting oxygen lever
Backfire Resistance	Standard – flashback arrestors essential	High – built-in by nozzle-mix design
Length	Approx. 450 mm (18")	Approx. 450 – 500 mm (18" – 20")
Hose Connection	3/8" BSP threaded inlets
Packaging	01 Nos (cutting nozzle not included)

Recommendations by Variant

Which torch to choose

2-Pipe: Everyday workshop and site cutting up to about 150 mm, at a lower cost. Always fit flashback arrestors.
3-Pipe: Heavy-duty fabrication, demolition and scrap cutting up to about 250 – 300 mm, with better protection against backfire and flashback.

Safety Guidelines

Flashback Arrestors: Fit approved arrestors at the regulators and torch inlets on both variants
Trained Use Only: Gas cutting should be done by trained operators
Protective Gear: Wear cutting goggles, gloves and fire-resistant clothing
Keep Oxygen Fittings Clean: Never use oil or grease on oxygen fittings or valves
Check for Leaks: Test all connections with soapy water before lighting

1) Which brand will I receive?

This is a generic listing, so the brand supplied depends on stock available at the time of dispatch and may differ from the images on our website and app. Every torch supplied matches the specifications listed for the variant you order.

2) Is the cutting nozzle included?

No. Nozzles are sold separately so you can choose the right size and gas type for the steel thickness you cut: ANM / PNM nozzles for the 3-pipe torch, or acetylene / LPG nozzles for the 2-pipe torch.

3) Can I use both LPG and acetylene?

Yes, both torches work with either gas, but you must fit the nozzle made for that gas. On a 3-pipe torch, use an ANM nozzle for acetylene and a PNM nozzle for LPG or propane.

4) Do I need flashback arrestors?

Yes. The 3-pipe torch is designed to resist backfire, but standard safety practice is to fit approved flashback arrestors on the regulators and torch inlets for both variants, to protect your hoses and cylinders.

5) What hose connection does it use?

Both variants have standard 3/8" BSP threaded inlets that fit common twin welding and cutting hoses.

Why Buy from HomeRun?

Quality Checked: Sourced from trusted suppliers and checked before dispatch
60-Minute Bangalore Delivery: Express delivery to job sites and workshops in active service zones
Two Variants: 2-pipe and 3-pipe torches to match your cutting work

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once used
Refer to Refund Policy for complete details

gas cutting torch 2 pipe 3 pipe cutting blowpipe nozzle mix cutting torch oxy acetylene lpg cutting torch heavy duty gas cutter bangalore