







CERA Bib Cock - Victor - F1015151
- Manufacturer: CERA Sanitaryware Limited
- Cat. No.: F1015151
- Product: Victor Bib Cock
- Range: CERA Victor
- Type: Bib cock — wall-mounted single tap
- Water: Single supply (cold, or whichever line it is fitted to)
- Use: Bathrooms, utility areas, service points and bucket filling
- Finish: Chrome plated
Downloads — Manual & Technical Drawing
- User Manual & Warranty: Download from the CERA product page — warranty terms and care instructions
- Technical Drawing: PDF and DWG available on the same page — dimensioned drawing for your plumber or fabricator
- Documents are hosted by CERA. We recommend downloading the technical drawing before installation, especially for concealed or built-in items
CERA Victor Bib Cock (F1015151) is a wall-mounted single tap from the Victor range — the straightforward outlet used for bucket filling, utility points and service taps.
A bib cock does one thing and does it without complication: it delivers water from a single supply line when opened. There is no mixing, no cartridge, and very little to fail, which is precisely why it remains the standard fitting anywhere reliability matters more than temperature control — a bathroom bucket point, a utility area, a service tap, a wash area.
Because it is a Victor-range fitting, it matches the other Victor taps and mixers in the same bathroom, so a service point does not look like an afterthought bolted onto a designed room.
Key Features
- Simple and reliable: No mixing cartridge, very little to go wrong
- Wall mounted: Frees the surface below entirely for a bucket
- Styled for the Victor range: Matches other Victor fittings in the room
- Suits bathrooms, utility areas and service points
- Chrome plating: Everlasting shine, easy to clean, resists stains
Technical Specifications
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Cat. No. | F1015151 |
| Range | CERA Victor |
| Type | Bib cock |
| Supply | Single water line |
| Mounting | Wall |
| Wall Flange | [CONFIRM — whether supplied with this code] |
| Finish | Chrome plated |
| Warranty | As per CERA’s standard warranty policy |
Before You Order
- A bib cock is a single-supply tap. It does not mix hot and cold — if you need warm water at that point, you need a mixer instead
- Check whether a wall flange is included, since it is what covers the rough opening at the wall
- Allow height beneath it for a bucket if that is what it is for — a bib cock fitted too low is a daily annoyance
- Clean with a soft damp cloth and mild detergent only. Abrasive powders, scouring pads and acidic descalers permanently dull chrome plating
- In hard water areas, wipe fittings dry after use. Bengaluru borewell water leaves mineral deposits that etch plating if left to dry on it
1) What is a bib cock used for?
It is a wall-mounted single tap for bucket filling, utility areas and service points. Simple, reliable, and with no mixing cartridge to fail.
2) Does it mix hot and cold water?
No — a bib cock delivers from a single supply line. If you need warm water at that point, fit a mixer instead.
3) How high should it be fitted?
High enough to get a bucket underneath comfortably, if that is its purpose. A bib cock fitted too low is a daily irritation that is awkward to correct once the wall is tiled.
4) Is a wall flange included?
Please confirm before ordering — the flange is the chrome plate that covers the rough wall opening, and without it the installation looks unfinished.
5) How do I care for the chrome?
Soft damp cloth and mild detergent only. Abrasive powders and acidic descalers permanently dull the plating. In hard water areas wipe it dry after use to prevent mineral etching.
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like






