Asian paints Trucare Grey Knifing Paste Filler

Name: Asian paints Trucare Grey Knifing Paste Filler
Brand: HomeRun
SKU: 7RAP3
Price: 199.0 INR
Availability: InStock

₹199

Assured 2% CashbackOn purchases above ₹50,000

Incl GST Shipping calculated at checkout.

Weight

1kg

₹199

2kg

₹399

5kg

₹984

Brand: Asian Paints
Product Group: TruCare
Product: Knifing Paste Filler (KPF) – Grey
Form / Consistency: Ready-to-Use Paste
Colour: Grey
Application: Raw or primed wooden and metallic surfaces
Thinning Solvent: Mineral Turpentine Oil (MTO)
Available Pack Sizes: 1 kg, 2 kg, 5 kg

Asian Paints TruCare Knifing Paste Filler (KPF) – Grey is a premium, ready-to-use solvent-based paste designed to patch and level minor dents, holes, and surface imperfections. It is engineered primarily for raw or primed wooden and metallic surfaces, curing into a rigid structure that acts as a flat substrate before applying enamel topcoats.

Highlights with Application

Ready-To-Use Paste: Possesses a uniform, butter-like consistency out of the tub for drag-free tool handling
Easy Cutting & Sanding: Dries into a crisp layer that can be abraded with water emery paper down to a flush finish without structural chipping
Hard Dry Profile: Cures entirely through its depth to bridge structural gaps
Thinning Adaptability: Although pre-mixed, it accepts Mineral Turpentine Oil (MTO) for projects requiring a lower viscosity fluid coat

Technical Specifications

Technical Specifications (Quick Reference)

Specification	Details
Brand	Asian Paints
Product Group	TruCare
Colour	Grey
Form / Consistency	Ready-to-use Paste
Drying Time (Surface)	30 Minutes (Maximum)
Recoating / Hard Dry Interval	4 to 6 Hours
Theoretical Coverage	4 – 6 sq. ft. / kg / coat (at a dry film thickness of 4 mils)
Flash Point Standard	> 30°C (> 85°F) as per IS101/1987 Part 1, Sec 6
Thinning Solvent	Mineral Turpentine Oil (MTO)
Shelf Life	2 Years in factory-sealed containers
Available Pack Sizes	1 kg, 2 kg, 5 kg

Step-by-Step Application Process

Sanding & Cleaning: Rub the bare wood or metallic surface using Emery Paper 180 to scrape off rust, residual flaking paint, scales, and grease. Wipe away loose particles
First Undercoat Primer: Spread a standard layer of solvent-based primer (e.g., TruCare Wood Primer or Red Oxide Metal Primer). Let it dry for 6–12 hours based on specific primer metrics
Filler Patching: Knife a uniform, thin layer of the Knifing Paste Filler directly into the surface voids using a flexible steel putty knife. Always fill deep cavities using multiple sequential thin coats rather than one massive chunk
Drying & Re-Sanding: Allow the filler to set and air-dry for 4 to 6 hours. Smooth out the patch using water emery paper grit 180 and clean off the dry dust residue
Sealer Primer Coat: Apply a follow-up spot layer of the primary wood or metal undercoat over the filled zone. Let it dry completely, execute a light final scuffing with paper grit 320, and lay down your final enamel paint

Recommendations

Primer Pairing: Always use an MTO-soluble primer coat underneath this filler. Pair it alongside TruCare Red Oxide Primer for mild steel installations or TruCare Wood Primer for interior/exterior timber layouts
Safety Protocols: This composition contains volatile organic solvents. Ensure high cross-ventilation during preparation and wear an anti-dust nose pad while sanding down the dried layers to prevent breathing in micro-particles
Storage Habit: Keep the lid tightly sealed and store the container upright in a cool, shaded workspace away from open flames, sparks, or intense daytime heat

Why Buy from HomeRun?

Authentic Asian Paints Product: Verified genuine product sourced from authorized distributors
60-Minute Bangalore Delivery: Express delivery to active service zones for urgent project needs
Project-Friendly Availability: Small 1 kg packs for touch-ups or larger 2 kg and 5 kg packs for full door, frame, or grille projects

1) Can I apply TruCare Knifing Paste Filler directly to bare, unprimed metal or wood?

No. The manufacturer data sheet explicitly mandates applying a compatible solvent-based wood or metal undercoat primer first. Applying it straight to bare substrates will severely degrade product adhesion and can induce localized blistering.

2) What should I use to thin down the paste filler if it feels too thick?

You can mix in a minimal, measured amount of Mineral Turpentine Oil (MTO) to thin it down to your preferred workability level.

3) Why is my filler cracking inside deep holes?

Cracking occurs when the filler paste is stuffed into a deep hole in a single, thick layer. The solvent evaporates unevenly, causing structural shrinkage. Deep depressions must always be filled using a succession of thin layers, allowing 4–6 hours of dry time between steps.

4) Is this product suitable for fixing structural cracks on concrete exterior walls?

No. TruCare Knifing Paste Filler is a solvent-based compound designed specifically for wood and metallic items like doors, grills, frames, and vehicles. For cement or masonry walls, you should use acrylic or cement-based wall putties.

5) How long can I store this filler before it needs to be used?

The product has a shelf life of 2 years when kept in its factory-sealed container. Once opened, keep the lid tightly sealed and store it upright in a cool, shaded space away from open flames, sparks, or intense daytime heat.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once opened or used
Refer to Refund Policy for complete details

asian paints trucare knifing paste filler grey wood metal filler putty surface repair bangalore