Asian Paints SmartCare Hydroloc Waterproof Coating, 1L

Name: Asian Paints SmartCare Hydroloc Waterproof Coating, 1L
Brand: HomeRun
SKU: 7WHVV
Price: 460.0 INR
Availability: InStock

₹460

Assured 2% CashbackOn purchases above ₹50,000

Incl GST Shipping calculated at checkout.

Manufacturer: Asian Paints
Product: SmartCare Hydroloc, single-component, ready-to-use interior waterproofing polymer
Colour & Finish: Translucent white, semi-gloss film
Coverage Rate: 40–50 sq ft per litre for 2 coats
Coats: 2 coats with 4 to 6 hours between them — never wet-on-wet
Pack Size: 1L
Application Areas: Interior walls at plaster level, as a pre-putty base coat
Warranty: 5 Years Waterproofing & Efflorescence Resistance

Asian Paints SmartCare Hydroloc is a single-component, ready-to-use penetrative waterproofing solution for interior wall dampness, seepage and efflorescence. It works directly at plaster level as a pre-putty base coat, so there is no plaster breaking or invasive wall hacking, which saves labour time and keeps the house dust-free. It dries to a tight but breathable waterproof film that blocks moisture and migrating mineral salts from reaching your paint, and can be applied over walls with up to 70% substrate moisture. The pack promises 5 years of waterproofing and efflorescence resistance.

Key Features

No Plaster Breaking: Brush it straight onto sound existing cement plaster
Anti-Efflorescence: Prevents the chalky white salt deposits caused by mineral migration
Breathable, Watertight Film: Stops liquid water getting in while letting wall vapour escape, so it doesn't blister

Technical Specifications

Specification	Details
Manufacturer	Asian Paints
Product	SmartCare Hydroloc
Type	Single-component, ready-to-use penetrative interior waterproofing polymer
Colour & Finish	Translucent white / semi-gloss film
Substrate Moisture Tolerance	Up to 70% moisture content
Coverage	40–50 sq ft per litre for the 2-coat system
Coats	2 coats by brush, applied straight from the container
Drying Between Coats	4 to 6 hours — never wet-on-wet
Dilution	None — do not dilute or mix with additives
Position in System	Pre-putty base coat at plaster level; acrylic wall putty must follow before primer and topcoat
Pack Sizes	1 Litre
Warranty	5 Years Waterproofing & Efflorescence Resistance

Common Applications

Interior Accent and Living Walls: Masonry with light to moderate ground dampness or hairline leak paths, before the finishing coats
Bathroom and Kitchen Adjacent Plaster: The reverse or interior sides of wet areas prone to humidity transmission
Pre-Putty Renovation Base: A protective base coat under premium wall putty on new construction or old-paint restoration

Application Guide

Prepare: Scrape off loose material, paint flakes, peeling putty and visible salt deposits down to bare plaster with wire brushes or putty knives, and seal any active plumbing leaks first
First Coat: Stir thoroughly and brush it on straight from the container
Wait 4 to 6 Hours: Never apply wet-on-wet. Overcoating before the first coat has dried traps uncured liquid underneath, so the film can't anchor to the plaster and the whole paint system peels
Second Coat: Apply the second coat the same way
Then Putty, Primer and Paint: Apply acrylic wall putty first, then a primer, then your topcoat. Never paint directly over Hydroloc, and never dilute it or mix in exterior additives

Why Buy from HomeRun?

Authentic Asian Paints Product: Verified genuine product sourced from authorized Asian Paints channels
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for active waterproofing and renovation projects
Project-Friendly Availability: Single-unit ordering of the 1 Litre pack for room-by-room procurement on residential and commercial interiors

1) Can I apply my coloured emulsion directly over Hydroloc?

No. Hydroloc is an under-putty coating at plaster level. Once it dries, apply a good acrylic wall putty for a smooth surface, then a primer, then your chosen topcoat.

2) Can I apply the second coat straight away, wet-on-wet?

No. Wait 4 to 6 hours between the first and second coats. Overcoating before the first coat has dried traps uncured liquid underneath, so the membrane can't anchor to the plaster and the whole paint system will peel.

3) Do I need to break the plaster to use it?

No. Unlike traditional interior waterproofing that means breaking down plaster to apply heavy cement coatings, Hydroloc works directly on sound existing plaster. You only need to remove loose paint and flaking putty.

4) How wet can the wall be?

Up to 70% substrate moisture content. Seal any active plumbing leaks before you start.

5) How much area does a pack cover?

About 40 to 50 sq ft per litre for the two-coat system, so the 1 Litre pack covers roughly 40–50 sq ft. Plan your quantity from the total wall area before you start.

6) Can I dilute it to stretch the coverage?

No. Apply it straight from the container, without dilution or exterior additives. Diluting weakens the waterproof film and compromises the seal against moisture and efflorescence.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once opened or used
Refer to Refund Policy for complete details

asian paints smartcare hydroloc interior waterproofing pre putty base coat efflorescence dampness 5 year warranty 1 litre bangalore