














Ebco Kitchen Drip Tray with Rod Supports and Anchor Kit
- Brand: Ebco
- Product: Kitchen Drip Tray – Grey
- Variants: 550mm/22" (DT22-10), 760mm/30" (DT30-10), 860mm/34" (DT34-10) – see table below
- Material & Finish: Plastic, grey
- Compatibility: Matches Ebco Plate Tray and Glass Tray of the same length
- Installation: No screws required
- Package Content: 1 grey plastic drip tray and 2 support rods with pre-attached anchors. Note: no screws are required to install this drip tray kit
- Not Included: Plate tray and glass tray are not included and must be purchased separately
- Application: Wall-mounted dish drying systems in modular kitchens
Ebco Kitchen Drip Tray is part of Ebco's wall-mounted dish drying system. It sits beneath the plate and glass trays to catch water dripping from freshly washed dishes, protecting your countertop and backsplash from water marks and stains. Its grey finish complements the stainless steel plate and glass trays.
It comes in three lengths – 550, 760 and 860 mm – to match Ebco plate and glass trays of the same size, for a complete, coordinated dish drying setup. Each pack includes 2 support rods with anchors already attached, and no screws are needed to fit it. The durable plastic tray is easy to remove and wash.
Key Features
- Catches Drips: Collects water from drying plates and glasses
- Protects Surfaces: Keeps countertops and backsplash free of water marks
- Matching Sizes: 3 lengths to match Ebco plate and glass trays
- Easy Fitting: Support rods with pre-attached anchors – no screws needed
- Easy to Clean: Lift out and wash with soap and water
Product Specifications Table
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Brand | Ebco |
| Product Type | Kitchen drip tray for wall-mounted dish drying system |
| Material & Finish | Plastic, grey |
| Lengths | 550mm/22", 760mm/30", 860mm/34" |
| Depth x Height | 243 x 22 mm (9.6" x 0.9") |
| Compatibility | Ebco Plate Tray and Glass Tray of the same length |
| In the Box | 1 grey plastic drip tray, 2 support rods with pre-attached anchors |
| Installation | No screws required |
| Not Included | Plate tray and glass tray |
Variants & Article Codes
| Length | Item Dimensions (W x D x H) | Article Code |
|---|---|---|
| 550mm/22" | 550 x 243 x 22 mm (21.7" x 9.6" x 0.9") | DT22-10 |
| 760mm/30" | 760 x 243 x 22 mm (29.9" x 9.6" x 0.9") | DT30-10 |
| 860mm/34" | 860 x 243 x 22 mm (33.9" x 9.6" x 0.9") | DT34-10 |
Choose the same length as your plate and glass trays.
Recommendations & Ideal Use-Cases
Where this fits best
- Dish Drying Systems: Completes wall-mounted plate and glass drying setups
- Above-Sink Units: Catches drips when the system is mounted over the sink
- Countertop Protection: Stops water marks and stains on kitchen surfaces
- Wet Kitchen Areas: Keeps busy, damp areas clean and tidy
Installation Guidelines
- Choose the Length: Pick the drip tray matching your plate and glass trays (550, 760 or 860 mm)
- Fit the Rods: Fit the 2 support rods with their pre-attached anchors – no screws needed
- Place the Tray: Position the drip tray below the plate and glass trays
- Check Alignment: Make sure it is level and catches all the dripping water
Why Buy from HomeRun?
- Authentic Ebco Product: Verified genuine product sourced from authorized Ebco channels
- 60-Minute Bangalore & Hyderabad Delivery: Express delivery to active service zones
- Complete System: Matching plate trays and glass trays also available
1) Which length should I order?
Order the same length as your Ebco Plate Tray and Glass Tray – 550, 760 or 860 mm – using the article code in the table above. The lengths must match exactly so the drip tray sits correctly beneath them.
2) Is it sold separately from the plate and glass trays?
Yes. The drip tray is sold separately. For a complete system, buy the matching plate tray, glass tray and drip tray in the same length.
3) Do I need screws to install it?
No. The pack includes 2 support rods with anchors already attached, so no screws are needed to fit this drip tray.
4) How do I clean it?
Lift the tray out and wash it with soap and water regularly to stop water spots and mineral build-up. Dry it fully before putting it back.
5) Will it work with other brands?
It is designed for Ebco plate and glass trays. It may not fit other brands, as their sizes and mounting systems differ.
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like



