




SMG Glass Door Hardware Combo Patch Set
- Brand: SMG
- Product: Glass Door Hardware Combo Patch Set
-
Variant Configuration:
- Double Spring Kit (SFS-8400)
- Double Spring Kit (SFS-7400)
- Surface-Mount Kit (SHFS-100)
- Max Door Weight / Width: Double Spring Kit (SFS-8400) – up to 120 kg and 1100 mm (3' 7") wide; Double Spring Kit (SFS-7400) & Surface-Mount Kit (SHFS-100) – up to 100 kg and 1000 mm (3' 3") wide
- Glass Thickness: 8 – 12 mm toughened glass
- Packaging: 01 Kit Set (Combo) for one glass door – refer to the specifications table below for complete kit contents
- Not Included (Purchase Separately): Glass panels, Wall Mounted Over Panel Patch with Pivot (SPF-4) for doors next to a wall, partition connecting patches
- Application: Main entrances, shopfronts, showrooms & office cabins
SMG Glass Door Hardware Combo Patch Set brings together everything needed to hang one frameless glass door in a single kit: the door closer, Top Patch (SPF-2), Bottom Patch (SPF-3, in Double Spring Kits), Over Panel Side Panel Connecting Patch with Pivot (SPF-1), Corner Patch Lock with Strike Plate (SPL-1) and H-Handle 302X450 (SGH-55). All parts are matched to work together, so there is no guesswork about compatibility.
Visible fittings have 1.2 mm SS 304 stainless steel covers, and every clamp is lined with non-slip gaskets to protect 8 – 12 mm toughened glass. Choose a Double Spring Kit (SFS-8400 or SFS-7400) for a concealed Double Spring Hinge set into the floor, or the Surface-Mount Kit with the Hydraulic Floor Spring (SHFS-100), which sits on the floor and needs no digging, ideal for marble, granite and post-tensioned slabs.
Key Features
- Complete Door Kit: Closer, patches, pivot patch, lock and handle for one door
- Matched Parts: Designed to fit together for smooth, reliable operation
- SS 304 Covers: 1.2 mm stainless steel for a clean, rust-resistant finish
- Secure Lock: Corner Patch Lock with Strike Plate (SPL-1) with Euro cylinder and 15 mm deadbolt
- No-Digging Option: Surface-Mount Kit (SHFS-100) sits on the finished floor
Product Specifications Table
Technical Specifications (Quick Reference)
| Specification | Double Spring Kit (SFS-8400) | Double Spring Kit (SFS-7400) | Surface-Mount Kit (SHFS-100) |
|---|---|---|---|
| Door Closer | Double Spring Hinge (SFS-8400) | Double Spring Hinge (SFS-7400) | Hydraulic Floor Spring (SHFS-100) |
| Floor Work | Floor box cut-out needed | Floor box cut-out needed | No floor digging |
| Max Door Weight | 120 kg | 100 kg | 100 kg |
| Max Door Width | 1100 mm (3' 7") | 1000 mm (3' 3") | 1000 mm (3' 3") |
| Pieces in Set | 6 | 6 | 5 |
| Included | 1. Double Spring Hinge (SFS-8400) 2. Top Patch (SPF-2) 3. Bottom Patch (SPF-3) 4. Over Panel Side Panel Connecting Patch with Pivot (SPF-1) 5. Corner Patch Lock with Strike Plate (SPL-1) 6. H-Handle 302X450 (SGH-55) |
1. Double Spring Hinge (SFS-7400) 2. Top Patch (SPF-2) 3. Bottom Patch (SPF-3) 4. Over Panel Side Panel Connecting Patch with Pivot (SPF-1) 5. Corner Patch Lock with Strike Plate (SPL-1) 6. H-Handle 302X450 (SGH-55) |
1. Hydraulic Floor Spring (SHFS-100) 2. Top Patch (SPF-2) 3. Over Panel Side Panel Connecting Patch with Pivot (SPF-1) 4. Corner Patch Lock with Strike Plate (SPL-1) 5. H-Handle 302X450 (SGH-55) |
| Glass Thickness | 8 – 12 mm toughened glass | ||
| Best For | Busy main entrances, showrooms, storefronts | Office cabins, partition entrances, standard storefronts | Marble / granite floors and slabs that cannot be cut |
Recommendations
- Before Toughening: Give your glass fabricator the H-Handle hole centres (302 mm) and the cutout details for each patch and the lock before the glass is toughened; toughened glass cannot be cut or drilled afterwards
- Align the Pivot: For Double Spring Kits, use a plumb line so the hinge spindle sits exactly below the pivot of the SPF-1. Misalignment makes the door drag
- Check Door Weight: Choose the Double Spring Kit (SFS-8400) for doors heavier than 100 kg or wider than 1000 mm (3' 3")
1) Why buy a combo set instead of separate parts?
All the parts in the set are made to work together: the closer spindle, patches, pivot, lock and handle drilling are matched. This saves you checking compatibility piece by piece and makes installation smoother. It is also simpler to order everything for a door in one go.
2) Does one set cover the whole door?
Yes. One kit has everything for one glass door below a glass over-panel: the closer, Top Patch (SPF-2), Bottom Patch (SPF-3, Double Spring Kits only), Over Panel Side Panel Connecting Patch with Pivot (SPF-1), Corner Patch Lock with Strike Plate (SPL-1) and one H-Handle 302X450 (SGH-55) pair. For double doors, order two sets.
3) Which kit should I choose?
Choose the Double Spring Kit (SFS-8400) for heavy, busy main entrances with doors up to 120 kg and 1100 mm (3' 7") wide. Choose the Double Spring Kit (SFS-7400) for standard doors up to 100 kg and 1000 mm (3' 3") wide. Choose the Surface-Mount Kit (SHFS-100) when the floor cannot be dug, such as finished marble or granite floors or post-tensioned slabs.
4) Why does the Surface-Mount Kit (SHFS-100) have only 5 pieces?
The Hydraulic Floor Spring (SHFS-100) clamps directly onto the bottom corner of the glass and acts as its own bottom pivot. So a separate Bottom Patch (SPF-3) is not needed and is left out of this kit.
5) My door is next to a wall, not a glass side panel. Will this kit work?
The kit includes the Over Panel Side Panel Connecting Patch with Pivot (SPF-1), which joins the glass over-panel to a glass side panel. If your door sits next to a wall or pillar, you will need the Wall Mounted Over Panel Patch with Pivot (SPF-4) instead, which is sold separately.
6) Can these be used on wooden doors?
No. All the fittings are made to clamp onto toughened glass with gaskets and through-bolts. Wooden doors need standard hinges, closers and locks made for wood.
7) What glass thickness do the sets support?
All fittings are made for 8 mm to 12 mm toughened glass. The gaskets in each fitting grip the glass firmly and spread the clamping pressure evenly.
8) Should I install it myself?
We recommend an experienced glass fitter. The closer, pivot and glass must be aligned accurately, and the floor box for Double Spring Kits needs careful cutting and levelling.
Why Buy from HomeRun?
- Authentic SMG Product: Verified genuine product sourced from authorized SMG channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for ongoing fit-outs
- One-Box Solution: Everything for one glass door in a single order
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like





