


















Wooden Gatta I Supporting Wedges for Fittings - 100 Pcs Pack
- Brand: Generic
- Product: Wooden Gatta / Supporting Wedges
- Material: Seasoned solid hardwood
- Shape: Tapered wedge
- Dimensions per Piece (L x W x H): 70 x 12 x 12 mm (2.8" x 0.5" x 0.5")
- Packaging: 100 pieces per pack
- Application: Levelling marble, granite & tiles, setting door and window frames, packing cargo
- Please Note: Brand may vary from the images shown, subject to stock availability. Specifications remain the same.
These Wooden Gatta (Supporting Wedges) are cut from seasoned solid hardwood in a tapered wedge shape, so you can tap them into gaps for precise levelling and firm support. Each piece measures 70 x 12 x 12 mm at its thickest end, and the pack contains 100 pieces, enough for a full site or installation crew.
They are used to level marble, granite and large tiles before the mortar sets, to plumb and hold door and window frames in wall openings, and to block and pack machinery or pipes during transport. The raw, unpolished grain grips concrete, stone and metal without sliding.
Key Features
- Seasoned Hardwood: Dense wood that resists crushing and cracking under heavy loads
- Tapered Profile: Tap it further into the gap for fine, accurate levelling
- Good Grip: Raw grain holds firmly against concrete, stone and metal
- Bulk Pack of 100: Convenient for construction sites and marble fitting crews
- Easy to Trim: Cut to a shorter length on site with a hand saw or cutter
Product Specifications Table
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Brand | Generic (subject to stock availability) |
| Product | Wooden Gatta / Supporting Wedges |
| Material | Seasoned solid hardwood |
| Shape | Tapered rectangular wedge |
| Dimensions per Piece (L x W x H) | 70 x 12 x 12 mm (2.8" x 0.5" x 0.5") at the thick end |
| Finish | Raw, natural grain |
| Packaging | 100 pieces per pack |
Recommendations & Ideal Use-Cases
Where this fits best
- Marble & Granite Fitting: Level heavy stone slabs and large tiles before the mortar sets
- Door & Window Frames: Plumb, level and hold wooden, UPVC or aluminium frames in wall openings
- Cargo Packing: Block machinery, pipes and loads in trucks and crates to stop shifting
1) What is the size of each piece?
Each wedge measures 70 mm long, 12 mm wide and 12 mm thick at its thickest end, tapering down from there. The dimensions are for a single piece; one pack contains 100 pieces.
2) Can they be used outdoors or with wet mortar?
Yes. Seasoned hardwood copes well with wet mortar, rain and humidity for the time needed on site, and swells far less than softwood. As with any natural wood, very long exposure to constant moisture will eventually cause wear.
3) Will they split when hammered under heavy stone?
Dense hardwood resists splitting well, so you can tap the wedges firmly into place with a mallet or hammer. Drive them gradually rather than with very hard blows, especially near knots, for the best results.
4) Are all pieces identical in colour?
Being natural wood, pieces vary slightly in colour, grain and knots. Their size and taper stay consistent across the pack.
5) Can I cut them to a shorter length?
Yes. Trim them on site with a hand saw or cutter if a gap needs a shorter wedge.
6) Will I receive the same brand as shown in the images?
The brand supplied is subject to stock availability and may differ from the images on our website and app. All supplied products meet the same specifications.
Why Buy from HomeRun?
- Quality Checked: Sourced from trusted suppliers and checked before dispatch
- 60-Minute Bangalore Delivery: Express delivery to job sites and workshops in active service zones
- Bulk Pack: 100 pieces per pack, ready for site use
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once opened or used
- Refer to Refund Policy for complete details
You may also like




