








- Brand: Hettich
- Product: Clamps for KA Telescopic Channels – drawer mounting accessory
- Compatibility: Hettich KA telescopic channels (e.g. KA 4532, KA 5632)
- Function: Connects the drawer box to the KA channels
- Connection: Clip-on – drawer can be removed and refitted without tools
- Usage: 2 clamps per drawer (one each side)
- Package Content: 1 set – 4 clamp tops, 4 clamp bottoms and fixing screws. Note: KA channels are not included and must be purchased separately
- Application: New KA channel drawers and replacement of worn clamps
Hettich Clamps for KA Channels are mounting accessories that connect your drawer box to Hettich KA telescopic channels. The clamps are fixed to the sides of the drawer box and clip onto the channels, giving a firm connection that keeps the drawer properly aligned and running smoothly.
Because the drawer simply clips on and off, it can be removed without tools for cleaning or maintenance and fitted back in seconds. Made for Hettich's KA channel range – including KA 4532 and KA 5632 – the clamps are useful for new drawer installations, and as replacements for damaged or worn clamps in existing KA drawers.
Key Features
- Made for KA Channels: Designed to fit Hettich KA telescopic channels
- Clip-On Connection: Drawer clips onto the channels for a secure fit
- Tool-Free Removal: Take the drawer out and refit it without tools
- Proper Alignment: Keeps the drawer straight for smooth running
- Ideal for Replacements: Swap out worn or broken clamps easily
Product Specifications Table
Technical Specifications (Quick Reference)
| Specification | Details |
|---|---|
| Brand | Hettich |
| Product Type | Drawer mounting clamps |
| Compatibility | Hettich KA telescopic channels |
| Connection | Clip-on, tool-free drawer removal |
| Usage | 2 per drawer (one each side) |
| Not Compatible With | Non-KA channels and other brands |
| In the Box | 1 set – 4 clamp tops, 4 clamp bottoms, fixing screws |
| Sold Separately | KA channels |
Installation Guidelines
- Fit the Channels: Install the KA channels in the cabinet as per Hettich's instructions
- Fix the Clamps: Attach one clamp to each side of the drawer box at the correct position
- Connect the Drawer: Clip the drawer's clamps onto the installed channels
- Test: Open and close the drawer to check it runs smoothly
- Adjust: Fine-tune the drawer alignment if needed
Why Buy from HomeRun?
- Authentic Hettich Product: Verified genuine product sourced from authorized Hettich channels
- 60-Minute Bangalore & Hyderabad Delivery: Express delivery to active service zones – ideal for urgent installations and repairs
- Complete KA System: KA channels and clamps available together
1) What are KA channel clamps used for?
They connect the drawer box to Hettich KA telescopic channels. The clamps are fixed to the drawer sides and clip onto the channels, so the drawer stays aligned and can be removed and refitted without tools.
2) Do they fit all Hettich channels?
No. They are made for Hettich KA channels, such as KA 4532 and KA 5632. They are not designed for other Hettich drawer systems or for channels from other brands.
3) How many clamps do I need per drawer?
Usually 2 per drawer – one on each side. Check your drawer and channel setup before ordering, especially for larger drawers.
4) Can I remove the drawer without tools?
Yes. The clip-on connection lets you take the drawer out and put it back without tools, which makes cleaning and maintenance easy.
5) Can I use them to replace broken clamps?
Yes. They are ideal for replacing damaged or worn clamps in existing KA channel drawers, restoring a secure connection and smooth running.
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like



