Free delivery on your first 5 orders, up to 2% cashback on every order, pay on delivery

Free Deliveryon orders above ₹500

60 Mins

Pay on Delivery

Asian Paints Smartcare Crackseal

Name: Asian Paints Smartcare Crackseal
Brand: HomeRun
SKU: QBDBX
Price: 160.0 INR
Availability: InStock

₹160

Assured 2% CashbackOn purchases above ₹50,000

Incl GST Shipping calculated at checkout.

Size

360g

₹160

900g

₹340

Manufacturer: Asian Paints
Product: SmartCare Crack Seal, Crack Filler
Material: Acrylic paste infused with synthetic glass fibres
Maximum Crack Width: Up to 3 mm
Coverage Rate: 25 running ft per kg (3 mm wide × 5 mm deep crack)
Drying: 4 to 6 hours between layers · 24 hours full cure before sanding or painting
Preparation: None — ready to use straight from the pack
Pack Sizes: 360 g, 900 g
Application Areas: Interior and exterior surfaces

Asian Paints SmartCare Crack Seal is a ready-to-use crack filling compound reinforced with fibre glass, for sealing cracks up to 3 mm wide on interior and exterior walls before painting. Cracks are the most common reason a paint job fails early: paint over an unfilled crack and it reappears within a season, often wider because water has got in behind it. Ordinary filler is rigid and cracks again along the same line as the wall moves; the glass fibres hold the filled joint together through that movement. There is no mixing, no ratio and no pot life — open the pack and apply.

Key Features

Fibre-Glass Reinforced: Resists the crack reopening as the wall moves
Ready to Use: No mixing, no ratios, no pot life to race against
Interior and Exterior, Paintable: One product for both, overcoated with your wall paint once cured

Technical Specifications

Specification	Details
Manufacturer	Asian Paints
Product	SmartCare Crack Seal
Type	Ready-to-use, fibre-glass reinforced crack filling compound
Material	Acrylic paste infused with synthetic glass fibres
Maximum Crack Width	Up to 3 mm — do not use on wider cracks
Coverage	25 running ft per kg for a 3 mm wide × 5 mm deep crack (2-coat system recommended)
Drying Between Layers	4 to 6 hours before applying a second levelling layer
Full Cure	Minimum 24 hours before sanding or painting
Preparation	None — ready to use straight from the pack
Suitable For	Interior and exterior surfaces
Pack Sizes	360 g, 900 g

How Much Do I Need?

Pack Size	Approx. Crack Length (3 mm × 5 mm)	Best For
360 g	About 9 running ft	Spot repairs and a handful of cracks
900 g	About 22.5 running ft	A full wall, or a room with cracking throughout

Wider or deeper cracks use more compound, so buy the size closest to your actual need.

How to Fill a Crack Properly

Open the Crack: Open it out slightly with a scraper or blade so the filler has something to key into — a hairline surface crack filled without opening it rarely holds
Clean: Remove all loose material, dust and flaking paint from inside and around the crack, and make sure the surface is dry
Fill: Press the compound firmly in so it fills the full depth, not just the surface, then level it flush with the wall
Second Layer: A 2-coat system is recommended. Wait 4 to 6 hours before applying a second levelling layer
Cure: Allow a minimum of 24 hours to cure fully before sanding or painting. Sanding or painting at about 6 hours traps moisture and makes the paint bubble
Finish: Sand smooth if needed, then prime and paint over the repair

Cracks wider than 3 mm need polymer-modified cement mortar or a specialised sealant. If a crack keeps returning, or runs diagonally across a structural element, stop and have it assessed — a persistent structural crack needs a different remedy, not more filler.

Complete System — Where This Fits

Step 0 — Crack Seal: Fill all cracks first (this product)
Step 1 — Primer: TruCare Sparc Interior Wall Primer, 1 coat
Step 2 — Putty: Acrylic Wall Putty, 2 coats
Step 3 — Primer: 1 more coat over the putty
Step 4 — Top Coat: Tractor Sparc for interiors, or Ace Sparc for exteriors, 2 coats

Why Buy from HomeRun?

Authentic Asian Paints Product: Verified genuine product sourced from authorized Asian Paints channels
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for active painting and renovation projects
Project-Friendly Availability: Single-unit ordering in 360 g and 900 g packs for room-by-room procurement on residential and commercial repairs

1) Can I just paint over a crack instead of filling it?

No. The crack will reappear through the new paint, usually within a season and often wider, because water gets in behind it. Filling first is what makes a repaint last.

2) Does it need mixing?

No. It is ready to use straight from the pack — no mixing, no ratios and no pot life — which makes it practical for DIY and fast for contractors.

3) What does the fibre-glass reinforcement do?

It resists the crack reopening. Rigid filler cracks again along the same line as the wall moves with heat and moisture; the glass fibres hold the filled joint together through that movement.

4) Which pack size should I buy?

One kg fills about 25 running ft of a 3 mm wide × 5 mm deep crack, so the 360 g tub covers roughly 9 running ft and the 900 g tub roughly 22.5 running ft. Buy the size closest to your need rather than over-ordering.

5) How wide a crack can it fill?

Cracks up to 3 mm wide. Wider cracks need polymer-modified cement mortar or a specialised sealant, not this product.

6) How long before I can sand or paint over it?

Wait 4 to 6 hours between layers, and allow a minimum of 24 hours for the repair to cure fully before sanding or painting. Sanding or painting at the 6-hour mark traps moisture inside the paste and makes the paint film bubble.

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once opened or used
Refer to Refund Policy for complete details

asian paints smartcare crack seal fibre glass crack filler 360 g 900 g interior exterior wall crack bangalore